Coil Pack Relocation

[FirebirdGT]

Has anyone relocated their coil packs to another location off the valve cover?
.

[Ibanezz]

Well that's a requirement for an m90 supercharger install, so yes a few people have done it. Skimpish on ftv6 just did so you could probably ask him

[alex553]

Re: Coil Pack Relocation

I've seen em relocated onto the firewall

[WarShrike]

Re: Coil Pack Relocation

Had to with my sheet metal valve covers.

Just tapped the firewall and mounted it with some screws. Don't have access to a welder and that was the best method. It's sat sturdy for 30K miles on our bumpy lubbock roads.

[FirebirdGT]

Re: Coil Pack Relocation

Had to with my sheet metal valve covers.

Just tapped the firewall and mounted it with some screws. Don't have access to a welder and that was the best method. It's sat sturdy for 30K miles on our bumpy lubbock roads.

Stock or custom plug wires?

.

[97rs4life]

Re: Coil Pack Relocation

I put mine on the firewall when I did the holden intakes. No need for custom length wires at all, same wires as before. :)

[FirebirdGT]

Re: Coil Pack Relocation

I put mine on the firewall when I did the holden intakes. No need for custom length wires at all, same wires as before. :)

How did you mount it? Same way as WarShrike?

Doing the FWD location, and having to extend the 14 wires, is looking more and more like a pain.

Really wanting to move it so I can get Aussie valve covers.
.

[WarShrike]

Re: Coil Pack Relocation

I used a cut to fit to properly clear the longtubes (tucked under).

[97rs4life]

Re: Coil Pack Relocation

I found a corner metal bracket at home depot/lowes and screwed that to the firewall and then attached the coils/bracket to that.