Paging ALL V6 Aftermarket Camshaft Owners - FirebirdV6.com/CamaroV6.com Message Board

Announcement

Collapse
No announcement yet.

Paging ALL V6 Aftermarket Camshaft Owners

Collapse
X
Collapse
 
  • Page of 4
  • Filter
  • Time
  • Show
Clear All
new posts
Previous 1 2 3 4 template Next
  • #31
    Name: Tom Murrin
    Car: 2000 Firebird
    Engine: L36
    Cam Vendor: COMP Cams
    Duration @ .050: 212 Intake, 212 Exhaust
    Camshaft Lift: .325" intake, .325" exhuast
    Lobe Separation: 112
    Intake Centerline: 108
    Rocker Ratio: 1.6
    <a href=\"http://www.fullthrottlev6.com\" target=\"_blank\">www.fullthrottlev6.com</a><br /><a href=\"http://www.chitownracing.com\" target=\"_blank\">www.chitownracing.com</a>

    Comment

    • #32
      Full Name: Ryan Lohrenz
      Car: 97 Camaro
      Engine: L36
      Cam Vendor: COMP Cams
      Duration @ .050: 216 Intake, 216 Exhaust
      Camshaft Lift: .317" intake, .317" exhuast
      Lobe Separation: 112
      Intake Centerline: 108
      Rocker Ratio: 1.6

      Zach's Specs for me... Just ordered it...
      Hopefully I will be as lucky in avoiding issues.

      My car is setup for nitrous btw. I didn't pick a cam for nitrous though.

      Heads will probably be stock, with some LS1 springs on board.

      [ August 12, 2003: Message edited by: AZ3.8Camaro ]</p>
      1997 Chevrolet Camaro v6 - 13.8@104MPH
      1997 Dodge Viper GTS

      Comment

      • #33
        name: Jeff Tomar
        screen name.. 1998silverbird
        type of cam: comp custom grind
        intake duration: 210
        exaust duration: 220
        Lobe seperation: 113
        centerline: 111
        intake lift: 534
        exuast lift: 547

        [ August 25, 2003: Message edited by: 1998silverbird ]</p>
        Jeff ..
        1998 Firebird.. Built 3.8 with a 125 shot.. 370rwhp,415rwtq.. stock tune!! sold

        2002 WS6 T/A.. Bolt ins..448rwhp
        2009 G8 GT.. Vararam intake, GXP axleback
        1998 Corvette.. Vararam intake, Ti axleback
        http://www.fquick.com/slow-v6

        Comment

        • #34
          Name : Dario Boscan
          Car : 1999 3.8 Camaro
          Engine: L36 N/A
          Cam Vendor: Comp Cam
          Hydraulic Roller Grind# 255HR12
          Lobe Separation : 112
          Duration @.050 : 200/206
          Lift : .496/.480
          intake Centerline : 108
          2003 Mustang Mach 1 5 Speed<br />288 rwhp SAE 315 rwtq SAE<br />BFG DR\'s, SLP Loudmouth Catback, K&N CAI<br />60\': 2.145<br />13.41@105.67MPH (Stock)<br />--- Best et ----<br />60: 1.932<br />1/4:12.851@106.39MPH <br />best mph: 107.65

          Comment

          • #35
            name: matt williamson
            car: 1995 3.4 camaro
            type: forced induction/turbo
            cam make: comp cams
            type: hydraulic flat tappet
            lobe center-112
            intake center-110
            intake duration- 324
            exhaust duration- 302
            intake lift@ valve- .552
            exhaust lift@ valve- .509
            rocker ratio- 1.6
            boost, you got it???

            Comment

            • #36
              99 camaro M5 NA
              CAM-360 - INTENSE™ Stage 1 Normally Aspirated Cam, duration @ .050": 212º/204º, lobe lifts: .322"/.298", valve lifts with 1.60:1 rocker arms: .515"/.477", lobe separation angle: 113º, intake centerline: 109º
              i was swimming in the carribean. animals were hiding behind the rocks except for the little fish, but they told me the squid\'s trying to talk to me. oink, oink. where is my mind?

              Comment

              • #37
                Adam Minier
                1994 Camaro M5
                Cam vendor- Lunati
                Duration I/E - 228/228
                Lobe sep. angle- 110 degrees
                Valve Lift - .496/.496 (with 1.6 rocker)
                Comp cams 1.6 ratio roller tip rockers
                1979 Z28 Camaro, 1 of 10,000 Factory 4 speeds. <br />1994 Camaro Sport Coupe, M5<br />Best ET: 15.31@91.5 (25 hp NOS)

                Comment

                • #38
                  <blockquote>quote:</font><hr>Originally posted by camaro28:
                  Adam Minier
                  1994 Camaro M5
                  Cam vendor- Lunati
                  Duration I/E - 228/228
                  Lobe sep. angle- 110 degrees
                  Valve Lift - .496/.496 (with 1.6 rocker)
                  Comp cams 1.6 ratio roller tip rockers                  <hr></blockquote>

                  did you run a 15.875 with that cam?
                  -Aaron, AKA ATL2001<br />93 3.4L <br /><a href=\"http://www.ilfba.com\" target=\"_blank\">www.ilfba.com</a>

                  Comment

                  • #39
                    no..

                    That was on stock motor, cold air, flowmaster rear section, BMR LCAs, and 3.73 gears/LSD

                    Same combo as above with a 30 shot ran 15.3 at 91
                    1979 Z28 Camaro, 1 of 10,000 Factory 4 speeds. <br />1994 Camaro Sport Coupe, M5<br />Best ET: 15.31@91.5 (25 hp NOS)

                    Comment

                    • #40
                      magnus,when are you going to be able to update the tech database with our information????
                      2003 Mustang Mach 1 5 Speed<br />288 rwhp SAE 315 rwtq SAE<br />BFG DR\'s, SLP Loudmouth Catback, K&N CAI<br />60\': 2.145<br />13.41@105.67MPH (Stock)<br />--- Best et ----<br />60: 1.932<br />1/4:12.851@106.39MPH <br />best mph: 107.65

                      Comment

                      • #41
                        I'll try to do it this weekend.
                        Keith - Chicago<br /><a href=\"http://www.hptuners.com\" target=\"_blank\">HP Tuners - PCM Reprogramming</a><br /><a href=\"http://www.dxsoftware.com/magnus/\" target=\"_blank\">97 Firebird V6 to LS1 swap</a><br /><b>V8 9.967@132.78</b> 1.322 60\' NA Heads/Cam<br /><b>V8 10.295@128.48</b> 1.363 60\' NA Cam Only<br /><b>V8 10.987@119.31</b> 1.422 60\' NA Stock Internals<br /><b>V6 13.674@98.22</b> NA<br /><b>V6 12.394@104.91</b> N20 100HP

                        Comment

                        • #42
                          great, thanks
                          2003 Mustang Mach 1 5 Speed<br />288 rwhp SAE 315 rwtq SAE<br />BFG DR\'s, SLP Loudmouth Catback, K&N CAI<br />60\': 2.145<br />13.41@105.67MPH (Stock)<br />--- Best et ----<br />60: 1.932<br />1/4:12.851@106.39MPH <br />best mph: 107.65

                          Comment

                          • #43
                            Full Name: RAR
                            Car: 1995 Firebird
                            Engine: 3.4 L
                            Cam Vendor: Clevite (got from my engine builder)
                            Duration @ .050: 204 Intake, 214 Exhaust
                            Camshaft Lift: .280" intake, .295" Exhuast
                            Valve Lift: .420" Intake, .443" Exhaust
                            Lobe Separation: 112
                            Intake Centerline: not spec
                            Rocker Ratio: 1.5

                            Very tame response, little kick at higher RPMs, very, very smooth throtle and idle. No SES light, still passes E-Check. Good for stock replacement - requires no new parts...

                            Comment

                            • #44
                              Full Name: Matt Scholtes
                              Car: 2002 camaro
                              Engine: L36
                              Cam Vendor: COMP Cams
                              Duration @ .050: 210 Intake, 210 Exhaust
                              Camshaft Lift: .317" intake, .317" exhuast
                              Lobe Separation: 111
                              Intake Centerline: 107
                              Rocker Ratio: 1.6

                              N/A

                              --matt

                              Comment

                              • #45
                                Full Name: Jon Kraeuter
                                Car: 96 Camaro
                                Engine: L36
                                Cam Vendor: COMP Cams (ZZP GT cam)
                                Duration @ .050: 210 Intake, 210 Exhaust
                                Camshaft Lift: .317" intake, .317" exhuast
                                Lobe Separation: 112
                                Intake Centerline: 108
                                Rocker Ratio: 1.6
                                1996 Silver Camaro, Y87, M5, cammed..<br />N/A Best Time: 14.012 @ 98.59<br />195 rwhp / 233 ft-lbs b/f heads/cam<br />Check out my site <a href=\"http://silver3800.cz28.com/\" target=\"_blank\">http://silver3800.cz28.com/</a>

                                Comment

                                Previous 1 2 3 4 template Next

                                Latest Topics

                                Collapse
                                View All

                                FORUM SPONSORS

                                Collapse
                                Working...
                                X

                                We process personal data about users of our site, through the use of cookies and other technologies, to deliver our services, personalize advertising, and to analyze site activity. We may share certain information about our users with our advertising and analytics partners. For additional details, refer to our Privacy Policy.

                                By clicking "I AGREE" below, you agree to our Privacy Policy and our personal data processing and cookie practices as described therein. You also acknowledge that this forum may be hosted outside your country and you consent to the collection, storage, and processing of your data in the country where this forum is hosted.

                                I Agree