Need Advise/Help, NOT A CAM Q. - FirebirdV6.com/CamaroV6.com Message Board

Announcement

Collapse
No announcement yet.

Need Advise/Help, NOT A CAM Q.

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

  • #16
    "On clevite 77 cam bearings and main bearings. Are they 18.99 and 66.99 EACH or is that for a set. If for each, how many of each do I need?"
    i bealive they are a set (call and make sure)i'm 99% there for the set
    if no i dont know how many cam bearings there are,
    and there are 2(two) main bearings

    "Also, this confused me:
    "they also sell vaule and everything thing at advance, vavle seat and the works"
    Can you clarify please?"
    [img]graemlins/rofl.gif[/img] i need to take spelling classes; Advanced sells new valves and valve guides, also sell the locks too

    head gaskets (advanced)
    Fel Pro 9917PT
    Left Hand Ships in 1 day
    Weight: 0.1 lbs.
    $22.88

    Fel Pro 9918PT
    Right Hand Ships in 1 day
    Weight: 0.1 lbs.
    $22.88

    was thinking about getting the Taylor Spiro 8mm wires, are the MSD wires better?
    i dont know, some say one some say the other, but i was at summit and they had a thing hooked up and had different brand wires and MSD was the lowest out of 5 major wires (OHMS anyway)
    i even pulle some off the shelf and tested to be sure it was not a set up and it held true!!!

    wires (Summit)
    MSD-32799 Spark Plug Wire Set, Red, 8.5mm Super Conductor, 6 Cylinder Custom Fit
    $54.69

    coils (summit)
    MSD-8224 For use on GM vehicles with 2-tower coil packs, 40,000 V, Blaster replacement coil...
    $39.88
    ^^^ you need 3

    "are you sending off your PCM to see if wester can tune 96-97 PCMs?"
    YES WHOOOOOOOOOOOOOOHHHHHHHHHHHOOOOOOOOOOO

    Viper

    [ February 21, 2004, 07:31 PM: Message edited by: viper04af ]
    www.turbov6camaro.com
    1997 3800 Series II Camaro
    4600 Stall for my ride to the mall :chug:
    7.18 @ 99.77 1/8 -1.8x sixty (current quickest v6 fbod)
    11.23 @ unk 5 1/4 - 7.19 1/8 - 1.83 sixty

    Comment


    • #17
      btw i would go with 130LB spring with that cam IMO let you rev higher
      www.turbov6camaro.com
      1997 3800 Series II Camaro
      4600 Stall for my ride to the mall :chug:
      7.18 @ 99.77 1/8 -1.8x sixty (current quickest v6 fbod)
      11.23 @ unk 5 1/4 - 7.19 1/8 - 1.83 sixty

      Comment


      • #18
        What rpm could I safely rev to with this set up? I don't want to be in danger of screwing up anything especially since I'm talking about doing all this.

        BTW, Please let me know the second you find out that they can tune 96-97 PCMS. That would help my set up out a ton.
        Polo Metallic Green \'96 Camaro w/Y87 Performance Package<br /><a href=\"http://www.cardomain.com/id/greenmaro24\" target=\"_blank\">Corey\'s Camaro</a>

        Comment


        • #19
          i would say about 6500 would be safe


          will do !!!
          www.turbov6camaro.com
          1997 3800 Series II Camaro
          4600 Stall for my ride to the mall :chug:
          7.18 @ 99.77 1/8 -1.8x sixty (current quickest v6 fbod)
          11.23 @ unk 5 1/4 - 7.19 1/8 - 1.83 sixty

          Comment


          • #20
            Originally posted by The_Unforgiven:
            Are you 100% sure the GM Cam Install Kit for the L36 with Timing Chain and Tensioner from 3800performance won't fit my 96 V6? It's listed under Firebird and Camaro.

            Come on guys help me finish this list please.
            What all bearings, rings, and lil' stuff will I need to replace?
            Also should I got with a fuel pressure reg. or anything to mess with fuel delivery?
            And should I mess with the ignition at all?
            No not positive this wont fit. I do know the intake gaskets for L36 front wheel drive and rear wheel drive are different. If they are saling the same kit for both engines then its probly the one for the fwd intakes.

            Even if it will fit i know all that stuff can be found cheaper through gmpartsdirect.com

            Comment


            • #21
              email and ask them but im sure it would
              www.turbov6camaro.com
              1997 3800 Series II Camaro
              4600 Stall for my ride to the mall :chug:
              7.18 @ 99.77 1/8 -1.8x sixty (current quickest v6 fbod)
              11.23 @ unk 5 1/4 - 7.19 1/8 - 1.83 sixty

              Comment


              • #22
                I'll email them and check it out when I get a chance.

                Viper: You said advanced sells new valves and valve guides, also sell the locks too. Do you have prices or part #'s for these?
                Polo Metallic Green \'96 Camaro w/Y87 Performance Package<br /><a href=\"http://www.cardomain.com/id/greenmaro24\" target=\"_blank\">Corey\'s Camaro</a>

                Comment


                • #23
                  from advacned - i think these prices are each

                  Valve guides -Sealed Power VG5006 $1.99

                  Vavle locks -Sealed Power VK291 $0.59

                  Vavles int- AE Clevite Engine Parts 2113218 11.99 ext- AE Clevite Engine Parts 2113215 13.99
                  www.turbov6camaro.com
                  1997 3800 Series II Camaro
                  4600 Stall for my ride to the mall :chug:
                  7.18 @ 99.77 1/8 -1.8x sixty (current quickest v6 fbod)
                  11.23 @ unk 5 1/4 - 7.19 1/8 - 1.83 sixty

                  Comment


                  • #24
                    from advacned - i think these prices are each

                    Valve guides -Sealed Power VG5006 $1.99

                    Vavle locks -Sealed Power VK291 $0.59

                    Vavles int- AE Clevite Engine Parts 2113218 $11.99
                    ext- AE Clevite Engine Parts 2113215 $13.99

                    or sealed power for $16.99 and $20.99
                    Sealed Power V4557 int (or summit for 11.99 Pn slp-V4557)
                    Sealed Power V4570 ext (or summit for 14.39 PN slp-V4570)
                    www.turbov6camaro.com
                    1997 3800 Series II Camaro
                    4600 Stall for my ride to the mall :chug:
                    7.18 @ 99.77 1/8 -1.8x sixty (current quickest v6 fbod)
                    11.23 @ unk 5 1/4 - 7.19 1/8 - 1.83 sixty

                    Comment


                    • #25
                      Which is better, AE Clevite or Sealed Power?

                      And what is "int" and "ext"? I'm guessing interior and exterior? Please explain it.
                      Polo Metallic Green \'96 Camaro w/Y87 Performance Package<br /><a href=\"http://www.cardomain.com/id/greenmaro24\" target=\"_blank\">Corey\'s Camaro</a>

                      Comment


                      • #26
                        int= intake
                        ext= exuast

                        better umm don't know any one hve any adv on witch one to get
                        www.turbov6camaro.com
                        1997 3800 Series II Camaro
                        4600 Stall for my ride to the mall :chug:
                        7.18 @ 99.77 1/8 -1.8x sixty (current quickest v6 fbod)
                        11.23 @ unk 5 1/4 - 7.19 1/8 - 1.83 sixty

                        Comment


                        • #27
                          Damn I feel so stupid. I should've known that.

                          I've got a friend that works at advanced, so I'll ask him if any knows which is better.
                          How many of each do I need?
                          Polo Metallic Green \'96 Camaro w/Y87 Performance Package<br /><a href=\"http://www.cardomain.com/id/greenmaro24\" target=\"_blank\">Corey\'s Camaro</a>

                          Comment


                          • #28
                            6 each :wink:
                            www.turbov6camaro.com
                            1997 3800 Series II Camaro
                            4600 Stall for my ride to the mall :chug:
                            7.18 @ 99.77 1/8 -1.8x sixty (current quickest v6 fbod)
                            11.23 @ unk 5 1/4 - 7.19 1/8 - 1.83 sixty

                            Comment


                            • #29
                              LOL, I figured so, I just wanted to be 110% sure. :D
                              Polo Metallic Green \'96 Camaro w/Y87 Performance Package<br /><a href=\"http://www.cardomain.com/id/greenmaro24\" target=\"_blank\">Corey\'s Camaro</a>

                              Comment

                              Latest Topics

                              Collapse

                              There are no results that meet this criteria.

                              FORUM SPONSORS

                              Collapse
                              Working...
                              X