Welcome to the FirebirdV6.com/CamaroV6.com forums.
You are currently viewing our boards as a guest which gives you limited access to view most discussions and access our other features. By joining our free community you will have access to post topics, communicate privately with other members (PM), respond to polls, upload content and access many other special features. Registration is fast, simple and absolutely free so please, join our community today!
If you have any problems with the registration process or your account login, please contact contact us.
If this is your first visit, be sure to
check out the FAQ by clicking the
link above. You may have to register
before you can post: click the register link above to proceed. To start viewing messages,
select the forum that you want to visit from the selection below.
Originally posted by AZ3.8Camaro: </font><blockquote>quote:</font><hr />Originally posted by kamarozrule: r u sure its not an LS1... thats a nice cam how much did it cost?
It was $315 for the cam, buy the time I bought all of the gaskets and other things I replaced, it was closer to $600 or more..
sounds great. I see 13.8 in your sig. was that before or after the cam? what track do you run at? great car. Also I thought that the LS1 valve springs wouldnt work on our cars?
2002 A4 Pewter Firebird.<br />Aluminum interior, custom aluminum whisper lid, custom ram air, Flowmaster cat bacl, high flow cat, pacesetter headers<br />15.018 on a ****ty track<br />15.65 stock on same ****ty track<br />15.33 stock on good track<br />= 14\'s on good track
Originally posted by CorbinWelter: does anybody know if the GT2 cam has more lobe then this 4x4 cam, or if it has any where near the same torque?
It will lope a little more due to the tighter 111 lsa Otherwise, it's the identical lobe from Comp Cams.
2000 Firebird. Whisper Lid, True duals, TSP mail order tune, Built Tranny , TCI 2800 stall verter, B&M tranny cooler, Eaton LSD, 3.42 gears. Current best ET. 15.232 89.09 MPH 2.175 60ft on stock 3.42\'s and open diff.<a href=\"http://www.geocities.c
This topic never dies.
Timbo is right.
If you want to buy the identical cam I have, you need to call comp directly. (IE go to their website, get the number and call.)
1997 Chevrolet Camaro v6 - 13.8@104MPH
1997 Dodge Viper GTS
that better be an old camaro [img]graemlins/rock.gif[/img] and not some ford [img]graemlins/slap.gif[/img] lol
1995 black firebird,t-tops,3.4L M5 Comp cam,gutted cat,Cold Air,80 series flowmaster,limited slip rear end with 3.42 gear, Hurst Billet Plus, 17\" American Racin Torq Thrust II
1995 black firebird,t-tops,3.4L M5 Comp cam,gutted cat,Cold Air,80 series flowmaster,limited slip rear end with 3.42 gear, Hurst Billet Plus, 17\" American Racin Torq Thrust II
Originally posted by Fear_Factor: that better be an old camaro [img]graemlins/rock.gif[/img] and not some ford [img]graemlins/slap.gif[/img] lol
Its a 3.8 from my 1997 camaro.
Driveability is fine. The car shakes at idle, but never dies or stalls. Gas mileage is about the same as stock, maybe some less, but its hard to tell because I drive it harder now anyways! :D
1997 Chevrolet Camaro v6 - 13.8@104MPH
1997 Dodge Viper GTS
So my truck is finally getting some work done, after 17 years, Oil pressure sensor went out and it’s located under the lower intake manifold. Have to...
2 weeks ago
FORUM SPONSORS
Collapse
Working...
X
We process personal data about users of our site, through the use of cookies and other technologies, to deliver our services, personalize advertising, and to analyze site activity. We may share certain information about our users with our advertising and analytics partners. For additional details, refer to our Privacy Policy.
By clicking "I AGREE" below, you agree to our Privacy Policy and our personal data processing and cookie practices as described therein. You also acknowledge that this forum may be hosted outside your country and you consent to the collection, storage, and processing of your data in the country where this forum is hosted.
Tweet
Comment