finally installed my 1.9 and ls6 springs

[UpOnGaMe]

what web site you get them from? just wondering i've only found some for 499.99 but for 369 for rockers and 100 for springs let me know thanks

[Kal-El]

AZ3.8CAMARO thanks for the tip but but im running stock caps on them and it hasnt bin giving me any problems latey. hers the sit where i got them
http://www.intense-racing.com/Mercha...egory_Code=HCV

[RedFrk13]

To give further info about what AZ is talking about. Here is his thread where this is discussed. [img]smile.gif[/img]

http://www.camarov6.com/ubb/ultimate...=003538#000005

[grayman]

full tech articl from ZZP:

http://www.zzperformance.com/grand_p...les1.php?id=53

[Kal-El]

hey everyone i talk to scott from intencse and he told me this:( No. LS6 valvesprings work just fine with stock valvespring retainers. They both measure exactly 0.645" ID in case you want to verify this yourself. We've installed these on hundreds of cars without issue.)

Hope this helps.

Scott
so what do u guys think should i still do the retainers?

[Kal-El]

if so what type should i get ls1 retainers or ls6 retainers which would work better for me thanks

[98Camaro3.8]

The diameter has nothing to do with it. The issue is the install height with the different retainers.

[AZ3.8Camaro]

Originally posted by Kal-El:
hey everyone i talk to scott from intencse and he told me this:( No. LS6 valvesprings work just fine with stock valvespring retainers. They both measure exactly 0.645" ID in case you want to verify this yourself. We've installed these on hundreds of cars without issue.)

Hope this helps.

Scott
so what do u guys think should i still do the retainers?

Scott is not a very intelligent person. That is not the issue at all.
Ask scott to look up the stock install height on an LS6 spring. Now have him look up the v6 spring. Its .100" off. The max lift on an LS6 spring when installed .100" lower than it is designed to work at is .500" and not .600" like they think it is.

[Kal-El]

so what type of retainers should i get ls1 or ls6? thanks for the help guys

[RedFrk13]

Originally posted by Kal-El:
so what type of retainers should i get ls1 or ls6? thanks for the help guys

I believe they are identical, so it doesnt matter which ones you get.

[AZ3.8Camaro]

Yeah they are the same.
Stock ls1 retainers are really cheap from some LS1 friends if you have any.

[Kal-El]

cool im get my retainers today thanks guys for let me know about this [img]graemlins/bowdown.gif[/img]