Welcome to the FirebirdV6.com/CamaroV6.com forums.
You are currently viewing our boards as a guest which gives you limited access to view most discussions and access our other features. By joining our free community you will have access to post topics, communicate privately with other members (PM), respond to polls, upload content and access many other special features. Registration is fast, simple and absolutely free so please, join our community today!
If you have any problems with the registration process or your account login, please contact contact us.
If this is your first visit, be sure to
check out the FAQ by clicking the
link above. You may have to register
before you can post: click the register link above to proceed. To start viewing messages,
select the forum that you want to visit from the selection below.
Hey i hear everyone talkina bout the cam sensor with an after market cam. i have a 94 3.4 and im gonna run this cam
Low & mid range torque & HP. Highway, off-road & trailer towing.
Adv. Duration: 258º/264º
Gross Lift: .401''/.423''
Series: 2020
am i gonna have that trouble of the cam sensor and all that bs?
does the cam have a camshaft position sensor tab? if it has ome you will be fine, if you dont have one then you will not have SFI... if the car runs right at all
BTW you know that you probably wont feel any better throtle response or any more power with that cam right?
then how do i know if the cam has a cam sensor lobe on it? when you say SFI are you meaning that i wont have my SFI fuel injection system? you dont think that cam will do anything?
thats one of the most mildest cams ive ever seen it might as well be a stock cam on a car with 1.6 ratio rocker arms
if the cam hasa little tab sticking off of the (forgive me for drinking way too much beer last night and not thinking straight today, but i cant think of the name) (place where the cam rests in the front journal) then it will be fine , if not then the car will batch fire teh injectors instead of in sequence for when the valves open
well i wanna run the 2030 now, but what are we supposed to do about the cam sensor tab? if the car runs like ****, why put a cam in it? do all cars have the cam sensor? is there a cam out htere that has the tab on it?
Originally posted by new2thegame: im havin that prob right now my car wont run worth a **** and i have the powermax 2030 cam in my 95 3.4 camaro check the cardomain page
And I am in his same boat. :( Mine did not have a cam sensor tab either. It wil not allow your SFI to function, ehich means it will batch-fire. Batch firing is more comparable to a carberation system or a TBI system. For example, with SFI the injectors fire 1-2-3-4-5-6. But with Batch fire, when number 1 is ready to fire, it fires 1,3, and 5. So in other words, the WHOLE right bank. Then when 2 is ready to fire, 2,4,and 6. So in other words, it runs pretty rich. I cant wait to save up some more money, etc, and get me a custom grind and port and polish many things. :D
Originally posted by 93camaro_zzz: </font><blockquote>quote:</font><hr />Originally posted by new2thegame: im havin that prob right now my car wont run worth a **** and i have the powermax 2030 cam in my 95 3.4 camaro check the cardomain page
And I am in his same boat. :( Mine did not have a cam sensor tab either. It wil not allow your SFI to function, ehich means it will batch-fire. Batch firing is more comparable to a carberation system or a TBI system. For example, with SFI the injectors fire 1-2-3-4-5-6. But with Batch fire, when number 1 is ready to fire, it fires 1,3, and 5. So in other words, the WHOLE right bank. Then when 2 is ready to fire, 2,4,and 6. So in other words, it runs pretty rich. I cant wait to save up some more money, etc, and get me a custom grind and port and polish many things. :D </font>[/QUOTE]WHich GMPP cam do you have? im lookin at running the 12363220 Camshaft am i gonna have teh batch fire too? if i do how bad is it? will it hurt performance or driveability?
Originally posted by Red94: WHich GMPP cam do you have? im lookin at running the 12363220 Camshaft am i gonna have teh batch fire too? if i do how bad is it? will it hurt performance or driveability?
Hey, the part number on my cam is 12364059. The cam you are looking at is the same cam as mine, except with a different LSA. My cam is higher. And I beleive that camshaft doesnt have the cam sensor tab either. About batch firing. I dunno, I dont like it too much. It runs rich, so it basically killed my gas mileage. Yet it has very good midrange, and better top end. Its a tossup. I think I am going with a custom grind.
Originally posted by 93camaro_zzz: </font><blockquote>quote:</font><hr />Originally posted by Red94: WHich GMPP cam do you have? im lookin at running the 12363220 Camshaft am i gonna have teh batch fire too? if i do how bad is it? will it hurt performance or driveability?
Hey, the part number on my cam is 12364059. The cam you are looking at is the same cam as mine, except with a different LSA. My cam is higher. And I beleive that camshaft doesnt have the cam sensor tab either. About batch firing. I dunno, I dont like it too much. It runs rich, so it basically killed my gas mileage. Yet it has very good midrange, and better top end. Its a tossup. I think I am going with a custom grind. </font>[/QUOTE]how much does a custom grind run? i like the numbers on the one i just posted, alls i want is one with a cam sensor tab on it.
Originally posted by viper98885: Call me tomorrow and I will look up pricing for Lunati and Comp custom grinds for the 3.4L V6. You will be suprised at how cheap they are.
i emailed lunatti asking them if they could make me a cam with certain specs and a cam sensor lobe, so im just waiting for a response
Originally posted by Red94: </font><blockquote>quote:</font><hr />Originally posted by viper98885: Call me tomorrow and I will look up pricing for Lunati and Comp custom grinds for the 3.4L V6. You will be suprised at how cheap they are.
i emailed lunatti asking them if they could make me a cam with certain specs and a cam sensor lobe, so im just waiting for a response </font>[/QUOTE]Let me know what they tell you, I would also like to know. ;) Thanks.
Originally posted by viper98885: You could always take the specs from the Crane 2030 and get Comp or Lunati to do a custom grind for you.
Josh whats going on with my cam? I need to talk to you about the specs and the details like if it will have sensor tap?? let me know thanks
Ben<br /><br />1995 White/Black 3.4L<br />As far away from stock as possible<br /><a href=\"http://www.cardomain.com/member_pages/view_page.pl?page_id=288292\" target=\"_blank\">My Site!!!</a><br /><a href=\"http://www.redlinevsix.com\" target=\"_blank\">RedLineV6</a><br />Rebuild and 3.4 T70 Turbo is complete<br />Details to come....
Hello every one, ozzy here ive been looking at this page for weeks now finally joined. So my question is why is it that every turbo build forum just ends...
Just ordered some Toyo 315/35/17 tires for my 17x11 rims. Hopefully I can get them on the beginning of next year. Will post pics.
5 days ago
FORUM SPONSORS
Collapse
Working...
X
We process personal data about users of our site, through the use of cookies and other technologies, to deliver our services, personalize advertising, and to analyze site activity. We may share certain information about our users with our advertising and analytics partners. For additional details, refer to our Privacy Policy.
By clicking "I AGREE" below, you agree to our Privacy Policy and our personal data processing and cookie practices as described therein. You also acknowledge that this forum may be hosted outside your country and you consent to the collection, storage, and processing of your data in the country where this forum is hosted.
Tweet
Comment