complete 3.4 rebuild help

[4thgenowner]

I've done a search and haven't got any answers im looking for so here goes. I am getting a bare 3.4L block and I want to rebuild it into a power 'monster' without forced induction. I'm on a limited budget 'cause im a student so I was wondering if anyone knew some good performance parts. Such as 9.5:1 pistons, crankshaft, connecting rods, heads, throttle body, fuel injectors. Thanks in advance for any info! [img]graemlins/thumbsup.gif[/img]

[Tiago]

if youre going NA , turn the CR ratio up to 10.5 or more if you are feeling lucky [img]smile.gif[/img]

[ProjectX]

give me a couple of hours I will have the list and setup I got hooked with K

James

[stagen]

I would poke around in this forum (http://www.s-series.org/) and see. A lot of S10 owners swap to the 3.4L. Here's a list of stuff to:
http://www.s-series.org/htm/performance/60degree.php

[4thgenowner]

I just got thinking that when I get the engine done what to do with the PCM? Will it freak out because of a milder cam or the compression ratio or will it re-lean the new specs? Probably reprogramed is the best way isn't it? It would suck to get engine with some power in there just to be reduced by the computer freaking out.

[stagen]

If your going through all that build up then \i would get it re-programmed but only after you've done everything.

[southern94]

do a reprogram i know someone willing to do the 3.4 if he can get a spare pcm to practice on

[Camaro15]

you should talk to Tom at supersix he could help you out with doing some cool sh*t to your stock 3.4 stuff.

[southern94]

i am doing a complete rebuild also i will let you know if i find anything helpful

[stagen]

<blockquote>quote:</font><hr>Originally posted by southern94:
do a reprogram i know someone willing to do the 3.4 if he can get a spare pcm to practice on<hr></blockquote>

I've got a spare PCM. By letting this person use/test on it do I get it back programmed for free with my sepcs?