Tweet
If i just got a cam like SSM's wut HP gain would i get? If i run 14.9 n/a now what would i run with just a cam? Thanks
-
Past Ride
1995 Firebird A4 3.8 Turbocharged -- 12.50 at 108
(If you dont know me, you haven't had a V6 long enough)
Current Ride
2006 Mitsubishi Evolution GSR
www.myspace.com/shane1015 -
I picked up 25hp at the wheels with the SSM cam, ported intake/TB, and tuning from the MAFT+. I haven't been to the track yet with the new setup but I'm going in a few weeks so I'll let you know my 1/4 mile gains.Michael Huff<br />92 RS, 98 V6, 97 SS, 00 Z28 <br /> <a href=\"http://www.carolinafbodyclub.com/\" target=\"_blank\">http://www.carolinafbodyclub.com/</a> -
Ok say i dont have the MAFT+ and the ported intake/TB what gains would i see?Past Ride
1995 Firebird A4 3.8 Turbocharged -- 12.50 at 108
(If you dont know me, you haven't had a V6 long enough)
Current Ride
2006 Mitsubishi Evolution GSR
www.myspace.com/shane1015Comment
-
i think you will see gains. i'm still debating on forced induction or motor work. i live 2 hours from tom@ SSM. i might give him my car and 4500$ and tell him to make me a beast... if i remember correctly keith didn't see any gains with the p@p intakes and tb. i could be wrong. i think now that he has a cam in there there are benifts with the porting due to more airflow...97 CAMARO RS<br />12.9@103mph<br />best 60ft..1.9 ( on street tires)<br /> 1.7 (on gas)<br />turbo supra 12.5@119mph (street tires)<br />new times to come sporting the sp63gtComment
-
How much could u get a SSM cam for?Past Ride
1995 Firebird A4 3.8 Turbocharged -- 12.50 at 108
(If you dont know me, you haven't had a V6 long enough)
Current Ride
2006 Mitsubishi Evolution GSR
www.myspace.com/shane1015Comment
-
bout 295..97 CAMARO RS<br />12.9@103mph<br />best 60ft..1.9 ( on street tires)<br /> 1.7 (on gas)<br />turbo supra 12.5@119mph (street tires)<br />new times to come sporting the sp63gtComment
-
<blockquote>quote:</font><hr>Originally posted by Ironman24:
I picked up 25hp at the wheels with the SSM cam, ported intake/TB, and tuning from the MAFT+. I haven't been to the track yet with the new setup but I'm going in a few weeks so I'll let you know my 1/4 mile gains.<hr></blockquote>
Wow 25hp at the wheels. Thats pretty impressive.
hey did you know there is another board member with the name IronMan? Is that you or somebody that just thinks your cool?Comment
-
How much would a install be?Past Ride
1995 Firebird A4 3.8 Turbocharged -- 12.50 at 108
(If you dont know me, you haven't had a V6 long enough)
Current Ride
2006 Mitsubishi Evolution GSR
www.myspace.com/shane1015Comment
-
That is an excellent question... How much does it cost for replacing a Cam on average, and will they have to tear down the engine?Comment
-
tom said a 1000 dollars for cam and new heads97 CAMARO RS<br />12.9@103mph<br />best 60ft..1.9 ( on street tires)<br /> 1.7 (on gas)<br />turbo supra 12.5@119mph (street tires)<br />new times to come sporting the sp63gtComment
-
is that install cost or cost for the heads and cam?Comment
-
install cost,that's it97 CAMARO RS<br />12.9@103mph<br />best 60ft..1.9 ( on street tires)<br /> 1.7 (on gas)<br />turbo supra 12.5@119mph (street tires)<br />new times to come sporting the sp63gtComment
-
to instal a cam is around $500. to get the whole power pack put in was $800. but then i also had more work so it totaled $975. but then dont forget the gaskets and a new timing chain6s.......under the hood or under the belt, they just dont cut it.Comment
-
Gaskets are $150 or so. It adds up.Comment
-
So for the Cam, Heads, Gaskets and work to install all the components, approximately what is a $$$$ amount? Approx. how much HP is the gain for this $$$ amount?
Also, after these components are installed, does the car have to be dyno tested to ensure enought fuel pressure is flowing and the engine properly tuned?
daveComment
Comment