Tweet
I was looking at the HT 3.4l crate engene and i was wondering if the intake manifold would work with this drop in? Would the computer like this or will it need to be changed as well. I know its the same block but will all of the stuff from the 2.8 fit the 3.4 including all sensers?
-
Black 87\' Firebird<br />Tented 20% and 5% on hatch<br />K&N, CAI<br />Modded 3.4 SOON to come<br />Stereo: Jensen Head unit, Boston tweeters, Kenwood 6x9\'s, Jensen 720Amp, 12\'s on the way -
yes the intake will bolt up just fine and for the computer you will have to have a custom chip made, for that try superchips.com97 \'maro 3.8L with magana flow exhaust and K&N air filter -
this as some info....
form my understanding way back n the day when I was looking ot do this swap, a PCM chage or reporgram was not neccessary.
http://www.tacreationsusa.com/v6.htm...ionInformation
Do not buy naything form the palce though they suck, and will screw you over. They do have doen it ot me and ohters.Comment
-
So my truck is finally getting some work done, after 17 years, Oil pressure sensor went out and it’s located under the lower intake manifold. Have to...6 days ago -
Hey guys. For starters I’ve always been a big car guy, I love all types of cars and can appreciate all types of engineering. I’ve always been a Chevy...3 weeks ago -
Getting a message saying invalid interface, haven’t used it since last year probably November. First time in 23 years I had a problem. Going to get...3 weeks ago
-
-
need help finding a balancer and a replacement balancer bolt. im at a lost after confusing myself researching.4 weeks ago
Comment