Tweet
I went to the Hypertech website and saw there was only a programmer for 2000-Up Firebirds. Will this one work with the 99 Birds? I wanted to recalibrate the PCM when I install the LSD with 3.42's. I wanted to avoid having to get the SLP processor because with the Hypertech I could use it for other stuff as well.
-
<b>.::[ 0 ]::.</b><br /><b>1997 Camaro 3800 II M5</b> (30th edition)<br />[]B&M Ripper Shifter<br />[]Proform Shift Light<br />[]SLP Cold Air<br />[]Dynomax Exhaust<br />[]Richmond 3.73\'s<br />[]Zexel-Torsen LSD<br />[]180* Thermostat<br />[]Tail Blackouts<br /><a href=\"http://photos.yahoo.com/skyracer_x\" target=\"_blank\">pics</a> -
AFAIK, they're still working on the 98s and 99s. Don't think a 2000 would work for a 99, as the exhaust manifolds might change some of the effects.
MattMatt
1998 Mystic Teal Camaro M5
Whisper Lid, Pacesetter Headers, Catco Cat, Dynomax Super Turbo, B&M Shifter, BMR STB, LSD, P&P Intakes, GT2 Cam, Comp OE Lifters, 1.7 Roller Rockers, Pushrods, SSM Heads, DHP PowrTuner. -
No, it will not work, do not bother buying one.2002 5-spd NBM Camaro
Details: www.1lev6.comComment
-
I thought it has been said on here, that if you have a '99, you can swap a '00 pcm into it. Then you can use the hypertech. You may want to search and see who has said this, but I'm pretty sure it's been brought up at least a couple of times.\'98 A4 Camaro v6->v8 conversion, and STS kit next<br />v6: 13.6 Powerdyne, 13.2 150 shot, 13.8 120 shot, 14.3 85 shot, 15.7 stock<br />v8(na): 12.18@113, 392rwhp<br />Moderator on <a href=\"http://www.mtfba.org\" target=\"_blank\">www.mtfba.org</a> and <a href=\"http://www.frrax.com\" target=\"_blank\">www.frrax.com</a> (Road Race & Autocross)<br /><a href=\"http://community.webshots.com/user/johnduncan10\" target=\"_blank\">Car pics</a>, <a href=\"http://www.trscca.com\" target=\"_blank\">TN Region SCCA</a>Comment
-
well i am in the process of buying a 00 pcm for my 99, ill let you know how it goes98 Jeep Grand Cherokee 5.9 Limited<br /><br /><br />MODS:<br />180* t-stat, K&N FIPK, mopar ECU,<br />mike leach long tube headers+3\" y-pipe, 3\" all the way out flowmaster 50 series, mopar magnum 2bbl m1 intake manifold, APS 52mm throttle body, powerslots, 2 JL 10w3\'sComment
-
i have a 00 pcm and it works awesome in my 99 my hypertech should be here wednesday i will let you know how it turns outComment
-
Where can you get a new pcm?Who sells them?Comment
-
well you can check junkyards but there is no garuntee that it will work just take your chances find a donor car 00-02 and swap pcm'sComment
-
need help finding a balancer and a replacement balancer bolt. im at a lost after confusing myself researching.3 hours ago -
Hello every one, ozzy here ive been looking at this page for weeks now finally joined. So my question is why is it that every turbo build forum just ends...2 days ago
-
-
-
I wish you guys the best for you and your family. Good health, happiness and prosperity. Merry Christmas and a happy new year....1 week ago
Comment