Is This Correct?

[Firebirdedgar]

Well i want to build a turbo 3.8. Can you tell me if im on the right path.

Heres my list:
used 3.8 motor
fff turbo kit
t70 0r bigger
ported heads
ported intake
diamond racing forged piston kit
l32 powdered conectin rods
slp aluminum roller rocker arms pkg
cam
crank hardened
msd dis-4
msd ignition control with boost control
msd coils
msd wires
ngk spark plugs
spearco intercooler front mounted
3" exhaust piping all the way to the back
aeromotive a2000 fuel pump rated at 500-2000 hp
aeromotive fuel filter
aeromtive billet fuel pump controller
accel 48 #/lb injectors
any nitrous kit for it to spray on the intercooler to have a massive temp drop
optima battery
custom tunning
B&M 4l60e custom transmission
4.10 gearing
aluminum driveshaft

['94firebirdv6]

everything sounds fine except with anything bigger than a t70 u will have massive amounts of lag and also it would be much more cost effective to have a methanol injection instead of the nitrous

btw it must be nice to have such a big budget that should be quite a set-up if u go through with it

[Firebirdedgar]

dont worry i will go through with it .
can i get you guys to recommend some parts
or some advice if you can. i do need some help.

[99v6cam]

If the turbo car is built for drag I wouldn't worry about lag because you can just rev it high at the line until it spools up before you launch (like supras do [img]smile.gif[/img] )

[Mogobs30th]

How soon do you plan on doing this project?? I have some recommendations, but it all depends. You want streetable, or full race setup?

['94firebirdv6]

a larger turbo will be fine for a track only car but it will not be very streetable if you go larger than a t70 is what i was trying to say

[Firebirdedgar]

im going to try to make it as streetable as i can. so ill stay with the t70