VS Cam??

[fieroX]

The vs cam is a good cam for the L67. The 115 degrees of lobe separation is great for holding boost. You guys with the L36 should pick a profile with something around 112 degrees of separation for optimum power. Contact Kevin Margitta of Digital Horsepower if you want to optimize your setup with a cam. The stock computer wont have the tweaks programmed into it for it to run 100% perfect with the aftermarket cam. speakerconnection@rogers.com
They have dyno'd the DHP pcm alone worth 20 hp to the wheels on a stock GTP, just with timing and fueling tweaks. This guy really knows his stuff. Good luck!

[Dominic]

<blockquote>quote:</font><hr>Originally posted by fieroX:
The vs cam is a good cam for the L67. The 115 degrees of lobe separation is great for holding boost. You guys with the L36 should pick a profile with something around 112 degrees of separation for optimum power. Contact Kevin Margitta of Digital Horsepower if you want to optimize your setup with a cam. The stock computer wont have the tweaks programmed into it for it to run 100% perfect with the aftermarket cam. speakerconnection@rogers.com
They have dyno'd the DHP pcm alone worth 20 hp to the wheels on a stock GTP, just with timing and fueling tweaks. This guy really knows his stuff. Good luck!<hr></blockquote>


Could you let us know how to contact him? Thanks.

[THUPERMAN]

Did you ever get ahold of him? Comp has cores now for ordering.

T

[toast]

Yes i am intrested also, unlike thuperman, i am keeping my V6 for quite a while. :D ;)

[V6Maniac]

Ok, so if I wanted to purchase the VS cam what else would I need? I assume you would also have to have the cam install kit but I noticed the last item on the contents list is 1 Supercharger Gasket, would this kit still work with our cars? If the VS cam and install kit both work and wont set a SES light I would order it right now. Even if it only gives 20-30 hp thats not bad for $300. [img]smile.gif[/img]