better 3.4 cam?

[Ryan94V6]

<blockquote>quote:</font><hr>Originally posted by camaro28:
how hard of an idle is the 110 LSA cam? is it something that can be dealt with driving in traffic? im not worried too much about rough idle as long as it keeps running ;) <hr></blockquote>

What I do know is Josh had to drill a hole in his throttle body plate to keep it running or something like that. But he also does have very big cam and he has told me that it does have some idle problems.

[ August 05, 2003: Message edited by: Ryan94V6 ]

[ August 05, 2003: Message edited by: Ryan94V6 ]</p>

[viper98885]

The part number for the Lunati with the 112 LSA stays the same, but when I order the cam, I give them the 112LSA specs.

As far as idling issuse, I did have to drill the throttle plate to keep it running. It runs fine now. I have emissions testing this month and I have serious doubts that I will actually pass so a little heads up for those that have esmission testing, watch out for which cam you go with.

[Ryan94V6]

Hey Josh , will I have any idle problems with a powermax 2030 cam with 109 LSA ?

[wolf]

<blockquote>quote:</font><hr>Originally posted by Ryan94V6:
Hey Josh , will I have any idle problems with a powermax 2030 cam with 109 LSA ?<hr></blockquote>


you shouldn't have any problems with that cam, but the idle will sound good :D

[viper98885]

Exactly what Wolf said.

[camaro28]

<blockquote>quote:</font><hr>Originally posted by Ryan94V6:
Hey Josh , will I have any idle problems with a powermax 2030 cam with 109 LSA ?<hr></blockquote>

I just bought this cam (see other post) but Ive been reading some that this cam isnt compatible with the 3.4?? This is the cam i bought:

http://store.summitracing.com/partde...t=CRN%2D254122

will I be able to use the cam in my car (94 3.4L) ???

[viper98885]

That cam will be fine. It is a hydraulic cam for flat tappet lifters. I would suggest calling Crane though and making sure that it has the tab for the cam position sensor behind the 1st cam bearing.

[Ryan94V6]

<blockquote>quote:</font><hr>Originally posted by viper98885:
That cam will be fine. It is a hydraulic cam for flat tappet lifters. I would suggest calling Crane though and making sure that it has the tab for the cam position sensor behind the 1st cam bearing.<hr></blockquote>

Damn.....my mechanic ordered that powermax 2030 cam for my car. It must be compatable with my car because he has already put my engine together and put the engine back into the car. Im going tomorrow to check it out! [img]smile.gif[/img] Hopefully he tells me everything went okay.