Tweet
I just recently built my motor and everything runs awesome! BUT there is a slight problem i came into. WHen the engine is running it pulls a vacuum on the darn valce cover. when i take the oil cap it is sucked down and i have to pull slighty to get it off and you can hear the sucking noise as it coimes off. then i can hold my hand over the place you put oil and after about 10 seconds it has a suction to it. what is this caused from?
-
-
huh? you taking your oil cap off when the car is running?? why??
naturally aspirated engines run at vaccum that's what makes a bunch of the stuff like the brake booster work. Not trying to be an Azz but your post is consfusing. Please use spell check.-Brad
98 Firebird - gone from mod mode to keep it running and useable mode.
2000 V-Star Custom 1100
If all else fails use a bigger hammer!
:rock: -
That's not what he's talking about. I don't think there should be a vacuum in the valve cover as there should be in the intake manifold. ;)Originally posted by black98V6:
naturally aspirated engines run at vaccum that's what makes a bunch of the stuff like the brake booster work.Matt
1998 Mystic Teal Camaro M5
Whisper Lid, Pacesetter Headers, Catco Cat, Dynomax Super Turbo, B&M Shifter, BMR STB, LSD, P&P Intakes, GT2 Cam, Comp OE Lifters, 1.7 Roller Rockers, Pushrods, SSM Heads, DHP PowrTuner.Comment
-
-
I would have to look at the PCV system but "most" GM motors WILL have vacuum at the oil fill.1996 Silver camaro Z28. M6,<br />12 bolt, 4.11\'s, posi, Rear cover, Spec stage 2, loudmouth, more <a href=\"http://home.mainstreamtopics.com/?index=3&module=1\" target=\"_blank\">http://home.mainstreamtopics.com/?index=3&module=1</a> <Mods, Pics & more <a href=\"http://home.mainstreamtopics.com/?index=3&module=2\" target=\"_blank\">http://home.mainstreamtopics.com/?index=3&module=2</a> <Fbody Tech ArticalsComment
-
-
The panel under the HVAC controls where the button is supposed to be is completely missing when I bought the car so I dont know if this car had TCS or...3 weeks ago
-
I was wondering, are these cars DBC or DBW?
If swapping in an LS motor (lets ignore the rest of the complexity of the swap), what would be...3 weeks ago -
Comment