Tweet
So after my rebuild I still odnt have any oil pressure. For those of you that have done a rebuild how did you prime that oil pump? I think I might have some trapped air in my pump...
-
\"If I have seen further, it is by standing upon the <br />shoulders of giants.\" (Isaac Newton) -
I have heard to pack it with vasoline, but I have never done it. I don't know what the "official" procedure is.
DEE1997 GTP(13.3@104)-Sold<br />1999 Trans Am M6 -
yeah you can use some assembly lube in it doesn't start dry, and gets the required suction..-Brad
98 Firebird - gone from mod mode to keep it running and useable mode.
2000 V-Star Custom 1100
If all else fails use a bigger hammer!
:rock:Comment
-
I second the assembly lube pack, I know that stuff doesnt mess with your oil.1997 Red GTP Coupe<br />Borla,3\" DP,!ubend,Thrasher CAI,Magnuson(3.4\"),1.9 roller rockers,Tran. Cooler,GPS PCM,Boost+Trans. Temp gauges(in Lotek),comp harness,Blazertech 3200\'s,BBS 18\'s+Pilots,RAT rear sway bar,Powerslots+Pf Pads(all corners),KYB\'s,STB\'s,Poly bushings(mid+end),Optima Battery(yellow), Kenwood Deck+Boston Interior Speakers(Pro)+RF Sub(550 watts), GTS covers,rear red reflective Pontiac sticker(My fav.)Comment
-
what i do on big block's adn small blocks is my dad has a distributor that is modified so you can put a drill on the top of it and spin the pump until the oil is running out of all the passages(you know it is when its coming out of the rockers or tips of the pushrods)...then its pre-oiled...
[ December 07, 2002: Message edited by: WickEdSix9838 ]</p><b>Black</b> 1998 Pontiac <i>Firebird</i> A-4 swap<br />271.4rwhp/259.4rwtq NA<br />13.30@102.44 <br /><a href=\"http://www.freewebs.com/wickedsix98\" target=\"_blank\">www.freewebs.com/wickedsix98</a>Comment
-
The block w/ distrubators are different. There isnt a place to do that on my block. It sits right behind the front cover. I will probably end up having to take my front cover back of and packing it...\"If I have seen further, it is by standing upon the <br />shoulders of giants.\" (Isaac Newton)Comment
-
Hello every one, ozzy here ive been looking at this page for weeks now finally joined. So my question is why is it that every turbo build forum just ends...18 hours ago -
-
-
I wish you guys the best for you and your family. Good health, happiness and prosperity. Merry Christmas and a happy new year....5 days ago -
Just ordered some Toyo 315/35/17 tires for my 17x11 rims. Hopefully I can get them on the beginning of next year. Will post pics.5 days ago
Comment