Jet scu2000 installation

[southern94]

i have researched the topic and not found instrctions on how to install the jetscu2000 i just changed gears and need to hook it up i bought it a while back so where does this thing plug in at??

[Nachius]

If your doing it really soon if you could post what you found out as well I'm installing mine in the next few weeks and haven't even looked at the instructions yet! I take it they're worthless?

[southern94]

see i bought mine used so i did not get the instructions :( so i am trying to get some i am doing it soon very soon actually i am going to try and do it thurs. or fri. depending on how much time it takes to fix my pinion seal leak and take that damn 2pc ds off finallyi will take pics if you want

[TheBeast]

edit: ahh let me advise this was done on my '99, so do what you will with my install instructions, the VSS might be located in a different spot

let me see if i remember....

i tapped the power source into one of the headlamp fuses in the fuse box. you need to route the tubing through the engine bay and use strap ties where necessary so it won't melt. the VSS is located on the passenger side just after the cat (its way up in there so don't attempt this until the car has cooled down or you will burn yourself on the cat!!)...unplug the VSS and attach it to one of the scu2000 plugs and plug the other side into where the VSS used to be plugged in.

shady description but thats how it goes [img]smile.gif[/img] also disconnect the neg battery terminal before you start!

[ May 06, 2002: Message edited by: TheBeast ]</p>

[cb1101]

hey southern-- are youleaking gear oil from the swap? i think mine is leaking too..i brought it back to the guy he said he overfilled it and thats y its leaking..but its been like 2 weeks and still leaking?? should i bring i back?

[southern94]

over filling will cause it to leak yea mine is leaking from the swap but that is because i damaged the pinion seal (ironman24 cough*) but i have to replace it get under your car and see if it is leaking where the ds is connected to the housing if it is the pinion seal is bad but i doubt it probley just overfilled and ti will leak out the vent at the top of the housing.

as far as the jet not to be rude man i am really stressed out with exams but i have no damn clue to what your talking about i don't know what the vss is or where it is located and i did not know i needed a power source haven't really looked at it i know the jet chip i put on the computer did so makes sence lil more info if you can like where this vss is at?? i can get a power down there no prob.

[TheBeast]

<blockquote>quote:</font><hr>Originally posted by southern94:
over filling will cause it to leak yea mine is leaking from the swap but that is because i damaged the pinion seal (ironman24 cough*) but i have to replace it get under your car and see if it is leaking where the ds is connected to the housing if it is the pinion seal is bad but i doubt it probley just overfilled and ti will leak out the vent at the top of the housing.

as far as the jet not to be rude man i am really stressed out with exams but i have no damn clue to what your talking about i don't know what the vss is or where it is located and i did not know i needed a power source haven't really looked at it i know the jet chip i put on the computer did so makes sence lil more info if you can like where this vss is at?? i can get a power down there no prob.<hr></blockquote>

well, now that i check Jet's website, they do not have a Jet scu2000 listed for the '94 3.4.... so that could mean that it might not work for your car. The VSS is the Vehicle Speed Sensor.

[southern94]

i was told it works for 94 and up it says it on the site where is the vss located on the car?

[bluecmaro96]

sorry bud you got ripped off, the scu 2000 only works on 96-99 3.8

[southern94]

well **** i reckon i will have to sell it

[cb1101]

i hope your right southern---

how do we fix our speedo after gear change?

i thought we could use the SCU2000...i guess not :(