Update: Heads/Cam is Finished Sound/Video clip inside

[Neil350]

Kris, just like you told me every major install has its down falls and problems. But you got that **** in and did a damn good job of doing it.

[nino]

focking beautiful kris. [img]graemlins/burnout.gif[/img]

[slacker69]

Well today i went back and retourqed the rocker bolts down at TDC and i grinded the underside of the rockers to allow for more clearence cause of the straight coil spings and my KR went from 14.9 to 9.8 KR This KR i got from 1000 to 2000 rpms so it has got better i will do the other side tommarow and pump in some 93 octane i still had a 1/4 of 87 octane whice is a no no. SO i lost alot of KR and i have only finished one side so far. Damn Weather

[whtefbrd96]

Looks good and sounds D@MN good !! mad props! quick question do you happen to know the part# of the gasket in between the upper and lower intake or do you use a RTV sealant or something... i have to take my inake off this weekend cause its leaking like a mofo, i have all the other gaskets except that one. Thanks for any help and d@mn good job again. [img]graemlins/fluffy.gif[/img]

[slacker69]

For your year part number for the intake gasket kit whice is upper and lower is GM-12537616

I used some RTV to seal on the lower intake gasket it is a little block that goes on the front and rear of the lower intake.

[ April 07, 2003: Message edited by: slacker69 ]</p>

[whtefbrd96]

thanks on that tip for sealing those litle blocks.... and once again looking good ;)

[camaro_zach]

sounds VERY good man, VERY good. im impressed. hope it performs well at the track, i cant wait to see the numbers.

[naptown]

I think that is one of the most best sounding cars ive ever heard, that isnt too loud or too ricey. VRERY GOOD! It gave me goose bumps.

[jmorgan]

thats open headers in the video for you people that dont know we had to cut them to drop them because he had had them welded together to prevent leaks (rk sports)


and actully its hella loud with open headers