Tweet
hey has anyone got the new roker arm kit from slp.
then tell me what you think of them do they give you good horsepower
then tell me what you think of them do they give you good horsepower
-
<a href=\"http://www.cardomain.com/profile/ohagen383\" target=\"_blank\">www.cardomain.com/profile/ohagen383</a> -
A few folks have pending installs, but it's just increased lift and less weight, nothing more. Will it add hp? Sure. But a full on cam would do it better. Not a bad way to gain, but there are better ones out there. All debatable of course.
Do a search.
-Rob<b>97 Camaro 3.8L M5</b><br />Car for sale<a href=\"http://terpmotors.com\" target=\"_blank\">terpmotors.com</a> Terrapin Motorsports! UMCP -
roller rockers are always good for a few extra ponies, less friction, most of the time less weight, and it'll just be one less weak point, they respond awesome with a decent cam and some decent flowing heads, sigh, wish i had the $ for some rockers for the 3.4Comment
-
<blockquote>quote:</font><hr>Originally posted by pigglyroot:
roller rockers are always good for a few extra ponies, less friction, most of the time less weight, and it'll just be one less weak point, they respond awesome with a decent cam and some decent flowing heads, sigh, wish i had the $ for some rockers for the 3.4<hr></blockquote>
thats what i was going to ask. these will work with a cam? actually, my question was, will these work with the power pack? if i can get my car running right, these rockers (if compatible) just might be my next major mod. though GMHTP says its only a 3 hour job.6s.......under the hood or under the belt, they just dont cut it.Comment
-
Pending install here also.
I have to add LS6 springs and Titanium retainersRace car - gone but not forgotten - 1997 firebird V6
nitrous et & mph: 12.168 & 110.95 mph, n/a 13.746 & 96.38 mph
2013 Dodge Challenger SRT8: 12.125, 116.45
2010 Ford Taurus SHO: no times yetComment
-
my nova REALLY opened up that 377 with a set of ported, polished and 3-angle valve jobed vic jr heads, custom grind bennett roller cam and a set of 1.7 crane roller rockersComment
-
<blockquote>quote:</font><hr>Originally posted by nino:
thats what i was going to ask. these will work with a cam? actually, my question was, will these work with the power pack? if i can get my car running right, these rockers (if compatible) just might be my next major mod. though GMHTP says its only a 3 hour job.<hr></blockquote>
They should work with a cam, but since the 1.8 ratio will increase lift, you will want a cam that has less lift than most aftermarket cams. See what I'm saying? Will just have to go a with a cam on the mild side as far as lift is concerned, becuase you are already getting more lift with the 1.8 ratio rocker arms.
And anybody please feel free to step in if i was unlcear or just don't know what im talking about. [img]smile.gif[/img]<b>Matt</b><br /><a href=\"http://www.cardomain.com/member_pages/view_page.pl?page_id=377225&page=1\" target=\"_blank\">\'96 Camaro Z28 M6</a><br /><a href=\"http://www.cardomain.com/member_pages/view_page.pl?page_id=377225&page=3\" target=\"_blank\">\'96 Camaro M5</a>Comment
Comment