Brakes not working after V8 swap

[rsjay2]

I finished doing a LT1 swap in my 1994 Camaro. I used a 94 LT1 auto. Engine seems to be working fine but I don't apppear to have any brakes. I bleeded the brakes thinking it was air in the lines but still no luck. I haven't had the car out for a spin yet until I get the brakes fixed. My ABS light is on also. The ABS sensors are hooked up and not losing any fluid. When I had the tire off the brakes appeared to be working. Any suggestions?? I also installed a hotcam in the LT1 but only a mild cam for that engine so there should be lots of vacuum.

[pgriffith]

Check all your vacuum lines, specially the one coming off the brake booster. Do you have any pressure on the petal or does it fall flat to the floor? If its a bleeding problem i would try to get one of those power brake bleeders, they work really well.