Tweet
I have a comp vs cam and its throwing 2 codes, 0300 i think which is multi cylinder misfire and a 14 something which is emmsions control, now is it the cam doing this or is something wrong with the car? how would i fix it?
-
2005 Cavalier LS Sport M5<br /> <a href=\"http://members.cardomain.com/firefighter8615\" target=\"_blank\">http://members.cardomain.com/firefighter8615</a> -
Thats the same cam I put in , the PO300 is it flashing and on the other code is it PO1441 incorrect purge flow?08' L76 6.0L 4X4 Chevy EXT.Cab LTZ Vortec MAX with Snug top cover, Dynomax exhaust,Hptuners& K&N intake
96' Camaro M5 to A4 conversion, alot of mods . GT35R Turbo full suspension. Built engine -
i will scan it again tomorrow at work, im pretty sure its said evap something, what causes it?2005 Cavalier LS Sport M5<br /> <a href=\"http://members.cardomain.com/firefighter8615\" target=\"_blank\">http://members.cardomain.com/firefighter8615</a>Comment
-
Its a evap code incorrect purge flow, it is located on the upper intake manifold pass. side in the back. Mine was a loose wire which would come on( not too often, maybe 3 times a year. It is for emmissions and I would not worry about it if you reset it and it doesn't come back. I had misfires too, and it was a coil and a injector.08' L76 6.0L 4X4 Chevy EXT.Cab LTZ Vortec MAX with Snug top cover, Dynomax exhaust,Hptuners& K&N intake
96' Camaro M5 to A4 conversion, alot of mods . GT35R Turbo full suspension. Built engineComment
-
i have cleared it and it does come back.2005 Cavalier LS Sport M5<br /> <a href=\"http://members.cardomain.com/firefighter8615\" target=\"_blank\">http://members.cardomain.com/firefighter8615</a>Comment
-
So my truck is finally getting some work done, after 17 years, Oil pressure sensor went out and it’s located under the lower intake manifold. Have to...2 weeks ago
Comment