Question for anyone with Hp Tuners program

[98camaroRS]

I am having a hard time getting the shift points right for the 2-3 shift for some reason it will not shift Ive lowered the shift mph vs tps and shift vs vhicle speed and it still will not shift. I raised my shift points to 6000 and fuel cut off to 6250. I had the same problem with first gear shift but I figured it out but I can not figure this out at all I have been tring this for a week know and still no closer. I went from stock 3.08 gears the 3.73. if that helps at all. If anyone can help I would greatly appreciate it.

['98 BlackBird]

I noticed that when my PCM was tuned by TSP, the 2nd-3rd shift is not as quick as the 1st-2nd shift. Maybe it's just hard to get it to reprogram.
Are you saying that your car will not shift at all out of 2nd?

[98camaroRS]

yeah it wil not shift out of 2nd at all it will hit the revlimiter before it will shift and I know that there is nothing wrong with the tranny cause I can put my Dhp tuned pcm back in and it works just fine.

['98 BlackBird]

Hmmm, you may want to e-mail Magnus at HP Tuners or Matt at TSP. they might be able to help you.
I wish I could help you, but I have no idea what that could be.

[mjparme]

HP Tuners has a forum which appears to have helpful/knowledgeable people on it. I bet someone there could help you:

http://www.hptuners.com/forum/YaBB.pl

Also, if you are putting a different PCM in your car you need to get a crank position relearn procedure done. I had a similar sympton (wouldn't shift out of second) with my first Wester's tuned PCM. I called Lyndon Wester and he told me to get the relearn procedure done and that fixed it right up. Is your SES light flashing for like 10-15 seconds when the car won't shift? This should only be an issue if you are putting a different PCM in your car. If it is the same PCM you probably don't have to worry about it, just throwing this out there just in case.

[Magnus]

If your car is not shifting you need to lower the shift points.

[ReodDai]

Originally posted by Magnus:
If your car is not shifting you need to lower the shift points.

Pure genius lol

[Magnus]

Ya, its pretty basic.

Keep your WOT vs RPM shift table stock. Then match up your WOT vs Speed and Speed vs TPS tables for 100% values.. then keep lowering them till it will shift.

A 3.08 gear may be ok shifting at 44mph but a 3.73 gear may need to be shifted at 37mph to avoid the rev limiter.

[ReodDai]

Much better Magnus *insert applause here*

[Magnus]

Ya, sorry for my short response. I was finishing up a feature for our 1.4 release.

[ReodDai]

Its all good. Good to see you still helping us out even tho your busy with your business ;)

[AllTheGoodNamesAreGone]

Originally posted by Magnus:
Ya, sorry for my short response. I was finishing up a feature for our 1.4 release.

uhhh... 1.4 [img]graemlins/naughty.gif[/img]

[Magnus]

Shoot me an e-mail (at my hp tuners account) with your customer ID and I'll put new software for you on our customer login page.. its 1.39999 ;)