Welcome to the FirebirdV6.com/CamaroV6.com forums.
You are currently viewing our boards as a guest which gives you limited access to view most discussions and access our other features. By joining our free community you will have access to post topics, communicate privately with other members (PM), respond to polls, upload content and access many other special features. Registration is fast, simple and absolutely free so please, join our community today!
If you have any problems with the registration process or your account login, please contact contact us.
If this is your first visit, be sure to
check out the FAQ by clicking the
link above. You may have to register
before you can post: click the register link above to proceed. To start viewing messages,
select the forum that you want to visit from the selection below.
i am reprogramming my PCM tomorrow and i can either do it as a 1999 or a 2000. ive heard of people who have done 2000 with no problems... anyone back this up? also in theory if my PCM was a 2000 i could use a HPP3 made for a 2000? thanks
edit: also... lets say i use slacker69s VIN, we could also then in theory share a HPP3 right? since it reads vins.
[ October 31, 2002: Message edited by: hawgs ]</p>
My 99 Firebird has 2000 programming, and it's worked just fine for two years now. I don't see any reason why you couldn't then use the Hypertech. As to whether you can share, well, try it and let us know.
<blockquote>quote:</font><hr>Originally posted by hawgs: i am reprogramming my PCM tomorrow and i can either do it as a 1999 or a 2000. ive heard of people who have done 2000 with no problems... anyone back this up? also in theory if my PCM was a 2000 i could use a HPP3 made for a 2000? thanks
edit: also... lets say i use slacker69s VIN, we could also then in theory share a HPP3 right? since it reads vins.
[ October 31, 2002: Message edited by: hawgs ]<hr></blockquote>
yes and the 2000 programming is better than the 99 because of the hpp3 capabilities.
<blockquote>quote:</font><hr>Originally posted by dukedusterwrx: Just a question but do you mind telling me where your getting youre computer reprogrammed to 2000 spec thanks<hr></blockquote>
had it programed today with kris' 2000 VIN... ordering the HPP3, so well find out if it will work on kris' and my car since they now have the "same" VIN number [img]smile.gif[/img]
why not it only reads the vin nu,ber on the pcm when hooked up to the obd-II connection if it picks up my vin on both cars then there should be no problem
<b><a href=\"http://www.sick-sixx.com\" target=\"_blank\">SICK-SIXX MEMBER</a></b><br />NA 14.345 with a 1.863 60 foot<br />Nitrous 13.03@99.5 with a 1.63 60 foot<br /><br />2000 Camaro 3.8L A4: USE TO HAVE Comp Cam 210/220 .535/.547 113lsa 111 I/C, Port and Polished Heads, NX Wet Kit 100 Shot, CPRA made by CP, RK Sport Headers
after talking to tiago matt and wes i dont think it will work. HPP3 sends a new program to the PCM that enables you to make changes. this can only be sent once. but the question/situation arises... what happens if you just happened to go to a delaership with a problem with your car and you have the HPP3 program loaded on to your car. the dealership decides that to fix whatever probelm by reflashing your PCM and therefore erasing the HPP3 program. you could then send the HPP3 back to hypertech and they will reload, for free, the program back on to it. so lets say hypothetically kris and i go in on a HPP3, i use it and get mine set where i want it. then "something happens to my car" and i take it to the dealership and they "reflash my PCM" therefore requiring me to send the HPP3 back to hypertech and have them reload it and therefore creating a new HPP3 program kris can use. this is all in theory and hypothetical... but sounds to me as if it will work. we shall find out.
<blockquote>quote:</font><hr>Originally posted by hawgs: after talking to tiago matt and wes i dont think it will work. HPP3 sends a new program to the PCM that enables you to make changes. this can only be sent once. but the question/situation arises... what happens if you just happened to go to a delaership with a problem with your car and you have the HPP3 program loaded on to your car. the dealership decides that to fix whatever probelm by reflashing your PCM and therefore erasing the HPP3 program. you could then send the HPP3 back to hypertech and they will reload, for free, the program back on to it. so lets say hypothetically kris and i go in on a HPP3, i use it and get mine set where i want it. then "something happens to my car" and i take it to the dealership and they "reflash my PCM" therefore requiring me to send the HPP3 back to hypertech and have them reload it and therefore creating a new HPP3 program kris can use. this is all in theory and hypothetical... but sounds to me as if it will work. we shall find out.<hr></blockquote>
Hello every one, ozzy here ive been looking at this page for weeks now finally joined. So my question is why is it that every turbo build forum just ends...
Just ordered some Toyo 315/35/17 tires for my 17x11 rims. Hopefully I can get them on the beginning of next year. Will post pics.
5 days ago
FORUM SPONSORS
Collapse
Working...
X
We process personal data about users of our site, through the use of cookies and other technologies, to deliver our services, personalize advertising, and to analyze site activity. We may share certain information about our users with our advertising and analytics partners. For additional details, refer to our Privacy Policy.
By clicking "I AGREE" below, you agree to our Privacy Policy and our personal data processing and cookie practices as described therein. You also acknowledge that this forum may be hosted outside your country and you consent to the collection, storage, and processing of your data in the country where this forum is hosted.
Tweet
Comment