heads

[agt orange]

i have a 97 firebird and was thinking of having them ported or whatever is there a difference between v6 heads like casting numbers that some are better than others

[98Camaro3.8]

All 95-02 3.8 cylinder heads are the same. Are you currently/planning on running a cam, FI, or nitrous? Having p&p heads by themselves won't really do much. They really work well when paired with a cam or power adder. Check out Super Six Motorsports for their heads.

[AllTheGoodNamesAreGone]

Originally posted by 98Camaro3.8:
All 95-02 3.8 cylinder heads are the same. Are you currently/planning on running a cam, FI, or nitrous? Having p&p heads by themselves won't really do much. They really work well when paired with a cam or power adder. Check out Super Six Motorsports for their heads.

yupp..

also look into intense racings heads.. I hear they are good.

zzp may do heads as well..

but its not really worth doing unless you have a big cam or FI as said above

[OneQuickV6]

While we're plugging non-sponsors here...I'll throw in Abbott Race Heads for my vote! He runs a wee-man cam, and their heads, in his 5 speed car, and has run 13.3's down the 1/4 mile. Their heads are also ALOT cheaper than Intense and ZZP, and he has hella betetr customer service than Tom at SSM!

Shoot me an e-mail for more info on how to contact him.

[T-Punk]

id have to give abbott my vote too. they are very quick to respond to questions, they have a great product and they are extremely reasonable.

[WickEdSix9838]

Abbott Racing Heads rock!! :D I'll be in the 12's as soon as I get this 12 bolt in the car and head down to sea level. The 13.30@102.4 was in approximately 4000' DA at a track thats 1800' above sea level. Here is all the prices: http://www.lonestarsix.com/forum19/270.html
And we actually are trying to get a cam GP together, heres the link to it. http://www.lonestarsix.com/forum19/687.html Email me if you have any questions at wickedsix98@hotmail.com
And just for everyones information, all the heads from 95-02 are NOT the same. The 95-97 heads have a divet in the casting where a injector would go that hurts flow about 2%. The 98+ heads do not have that.

[oil pan 4]

Every one seams to like abbott heads so go with them.