Motors

[ftmyerssleeper]

Does anyone know if an L67 will bolt up to our trans and if it is possible for a swap.

[Niko97RS]

Re: Motors

anything is possible with unlimited funds and alot of fabrication

possible yes...

easy, NO WAY

[rdrr96]

Re: Motors

difference in flywheel/flex plate and stuff like that. but yeah its possible.

[97rs4life]

Re: Motors

the l67 block is the same as our l36 block.

[ftmyerssleeper]

Re: Motors

as for a 4l60E, it'll bolt right up? And I'm assuming that the motor mounts are the same.

[ftmyerssleeper]

Re: Motors

The reason that I'm asking this is because I have two motors available. One is a l67 3800 sc and the other is an l36 3800 sc. I currently am running a l32 setup and I'm guessing that the 36 swap will be less complicated than a 67 swap. Is my logic correct?

[blown00]

Re: Motors

L67 97-03 3800 SC Series II
L36 97-03 3800 NA Series II
L32 04-06 3800 SC Series III
L26 04-06 3800 NA Series III

No your logic is not correct. The blocks themselves are identical, the difference are the internals. Right now you are running a L36 (assuming your motor is stock). Any of those blocks will work. Even from regals, monte carlos, impalas... anything with that motor. the tranny will bolt right up.

[UDLOSE98]

Re: Motors

L67 97-03 3800 SC Series II
L36 97-03 3800 NA Series II (edit 95 & up)
L32 04-06 3800 SC Series III (edit L32 is also a 3.4L found up to 95)
L26 04-06 3800 NA Series III

No your logic is not correct. The blocks themselves are identical, the difference are the internals. Right now you are running a L36 (assuming your motor is stock). Any of those blocks will work. Even from regals, monte carlos, impalas... anything with that motor. the tranny will bolt right up.

gotta do it.

[UDLOSE98]

Re: Motors

anything is possible with unlimited funds and alot of fabrication

possible yes...

easy, NO WAY

oh Niko...

[UDLOSE98]

Re: Motors

The reason that I'm asking this is because I have two motors available. One is a l67 3800 sc and the other is an l36 3800 sc. I currently am running a l32 setup and I'm guessing that the 36 swap will be less complicated than a 67 swap. Is my logic correct?

you wont be able to use the S/C on that block, Just the short block.

[Daviselk]

Re: Motors

want some spam udlose? lol i have seen 2 posts in a row... but 3 is somthing special

[UDLOSE98]

Re: Motors

want some spam udlose? lol i have seen 2 posts in a row... but 3 is somthing special

i have a lot to say, all of it equally important.

[ftmyerssleeper]

Re: Motors

[No your logic is not correct. The blocks themselves are identical, the difference are the internals. Right now you are running a L36 (assuming your motor is stock). Any of those blocks will work. Even from regals, monte carlos, impalas... anything with that motor. the tranny will bolt right up.]

I'm not running a L36, I have a L32. Why can't I have the sc? It's on the motor.

[UDLOSE98]

Re: Motors

you are saying you have a L32 (gtp) long block?

If so, and it came from a US car it WILL NOT FIT with the S/C

[Niko97RS]

Re: Motors

hey Dan i highly doubt that "oh Niko" is a relavant post lol

and u def have 3 in row and liek 7 so far

btw what did u mean by "oh Niko"