for those running LS1 MAF

[UDLOSE98]

...just stumbled across and picked up this from ZZP today, pretty cool, check it out


http://www.zzperformance.com/grand_p...=603&catid=108

[Tech]

Re: for those running LS1 MAF

So, you are up and running?

[SilverRS96]

Re: for those running LS1 MAF

there would b a huge thread if that thing was up and running....DURRRR

[slow6]

Re: for those running LS1 MAF

How good is the LS1?
I've read about the 2-bar gp maps

at least your problem has been figured out yeay!

[97rs4life]

Re: for those running LS1 MAF

there is a guy by the name of usd2sing who doesn't go on this site that runs the vette MAF with the IAT sensor built in. He plugged his TB and put the new MAF inline in front of the tb. Works just fine using that 3-5 wire connector from zzp....however I think you are still going to have issues maxing that out.



Andrew is working on a lt1 maf and seeing if it will let him run more air though.

[97rs4life]

Re: for those running LS1 MAF

If that is directed at me.....?
Travis you know I know dan (usd2sing) and I know of his LS6 maf for n20.
If you read my thread over there?

no this was for UDLOSE98 to know that it has been done and the wire adapter works great

[UDLOSE98]

Re: for those running LS1 MAF

i have heard issues of outflowing it....guess i'll just have to wait and see

[97rs4life]

Re: for those running LS1 MAF

yea the ls1 doesn't flow as much as the lt1 maf, they are both being maxed though

[RadRacer]

Re: for those running LS1 MAF

So, is there any gain to switching to a LT1 or LS1 MAF? I've got one I can get if it is :D

[slow6]

Re: for those running LS1 MAF

not really, not for an N/A application

[97rs4life]

Re: for those running LS1 MAF

So, is there any gain to switching to a LT1 or LS1 MAF? I've got one I can get if it is :D

It's for the guys running power adders and maxing the stocker out. No gains really from switching it NA. Main problem is the computer tuning ability holding it all back unless they trick the pcm into thinking it has different sized injectors in there and tweaking the maf table then.