Cam, am I ready?

[Smoke Panther]

Re: Cam, am I ready?

Thats not really true anymore...

yes, and said hardware is on the OP's to-buy list?

[AZ3.8Camaro]

Re: Cam, am I ready?

I have a custom grind, very similar to the GT2, it ran with no tune just fine.
I ran nitrous with it as well.
Don't buy a nitrous cam unless the car only makes passes on spray, and has larger than a 150 shot or so.
The gt2 and some headers and a high flow cat will be enough for the nitrous.

You can run it on stock valvetrain if you so desire, I would at least put in a fresh set of springs, if not aftermarket, than stock.

[RadRacer]

Re: Cam, am I ready?

Cam, 105# Springs, Spring Retainers. Should be all I need, right?

[UDLOSE98]

Re: Cam, am I ready?

all gaskets, rocker arm bolts, new head bolts/studs, injector O rings ( i would), pulley puller,

might be missing some things

[RadRacer]

Re: Cam, am I ready?

all gaskets, rocker arm bolts, new head bolts/studs, injector O rings ( i would), pulley puller,

might be missing some things

Have a pulley puller, so I should just need this> Cam Install Kit

[UDLOSE98]

Re: Cam, am I ready?

hmmm, link didnt work, but be careful with the ZZP cam install kit, you need a new cam bolt and crank bolt....the crank bolt they provide is for the L67 and will not work.

also i would recommend going double roller timing chain as long as you are in there.

[RadRacer]

Re: Cam, am I ready?

Timing Chain
Cam Install Kit

Kit #4, made for the L36:

Kit 4 includes:

*12 rocker bolts
*intake gasket set
*front cover gasket
*ARP assembly lube
*valve cover gaskets
*crank bolt
*cam bolt

[airattack111]

Re: Cam, am I ready?

Don't buy a nitrous cam unless the car only makes passes on spray, and has

Why? I run a nitrous cam and the car has never been run on nitrous or boost yet. Best time is a 14.3 on stock manifolds, street tires, stock stall, and a fair tune.

[caspernicus]

Re: Cam, am I ready?

Timing Chain
Cam Install Kit

Kit #4, made for the L36:

Kit 4 includes:

*12 rocker bolts
*intake gasket set
*front cover gasket
*ARP assembly lube
*valve cover gaskets
*crank bolt
*cam bolt

You'll also need to buy an upper intake manifold gasket set(most auto parts
stores have it listed under plenum gasket) and a throttle body gasket. Most
of the time the throttle body gasket comes with the upper intake mani gasket.