Tweet
I've noticed for some time now my fuel pressure at WOT is 50 psi, idle is 44-46 psi. I have a walbro 255 high flow pump and 36lb injectors tuned with HP Tuners. No problems with misfires or any codes. Have a VS cam, run nitrous once and awhile with a 125 wet shot, no issues. Wideband is working showing 12.7 to 12.8 N/A and 11.8 to 12.0 on the nitrous with the fuel pressure still at 50 PSI at WOT. I think in the Tech pages it says WOT should be 55 PSI at WOT. My Vac. was showing 16-18 ar idle which is pretty normal for the cam and 20 to 22 while crusing. With the 36lb injectors in at WOT I'm at 56%-58% injector duty cycle. Anyone think there is something wrong some where with the fuel pressure reg. of the walbro pump? Or is this normal since I have no issues. Also all O2 sensors where just replaced.
-
08' L76 6.0L 4X4 Chevy EXT.Cab LTZ Vortec MAX with Snug top cover, Dynomax exhaust,Hptuners& K&N intake
96' Camaro M5 to A4 conversion, alot of mods . GT35R Turbo full suspension. Built engine -
Re: Fuel pressure at WOT?
within 10 psi is normal they normally give you a span of acceptable pressure -
Re: Fuel pressure at WOT?
Thanks auto666, that makes me feel alot better.08' L76 6.0L 4X4 Chevy EXT.Cab LTZ Vortec MAX with Snug top cover, Dynomax exhaust,Hptuners& K&N intake
96' Camaro M5 to A4 conversion, alot of mods . GT35R Turbo full suspension. Built engineComment
-
Hello every one, ozzy here ive been looking at this page for weeks now finally joined. So my question is why is it that every turbo build forum just ends...18 hours ago -
-
-
I wish you guys the best for you and your family. Good health, happiness and prosperity. Merry Christmas and a happy new year....5 days ago -
Just ordered some Toyo 315/35/17 tires for my 17x11 rims. Hopefully I can get them on the beginning of next year. Will post pics.5 days ago
Comment