Cam install pics... plus a question

[lilchubby]

I finally got around to installing the gt2 and the 105# springs. Here is a link to our local boards with some pics and info on the crazyness that went on that day.

http://bamaclubgp.org/forum/viewtopi...240&no=1#10240

I have one question. while removing the lim i broke th 90 degree coolant elbow. I need to replace that one, as well as the other while im at it. Anyone have an idea where i can pick these up at. the local auto zone said they dont carry them. thanks in advance guys.

[turbohead2332]

Re: Cam install pics... plus a question

Isn't that the same plastic piece everyone else breaks and some people break to start off with just so they don't have to worry about breaking it at all?

[lilchubby]

Re: Cam install pics... plus a question

i belive so, i think i have found them at zzp. one other question now though. where can i get a throttlebody gasket at?

[Firebirdkid96]

Re: Cam install pics... plus a question

Dealerrr

[Tom Rs]

Re: Cam install pics... plus a question

u can get that black elbow at autozone in the !help section

[RadRacer]

Re: Cam install pics... plus a question

Or, go to Advance and get a new tensioner pulley set-up, that will have it in there. Then return the pulley without it; my Advance just takes my word for it, never checks the box. The dealer should have them too, I was told they were ~$15