Tweet
Re: problem after cam install
210/220 .512/.512 112
210/220 .512/.512 112
-
-
Re: problem after cam install
what he said
Abbott long tubes,homemade true duals,slp ram air,whisper lid,eibach springs,kyb shocks,BMR subframe connectors, BMR LCA reloc brackets,BMR LCAs. T-top/manual convertedComment
-
Re: problem after cam install
problem fixed?Y87 Package
MANUAL CONVERTED, Pro 5.0 Shifter
Pacesetters, Magnaflow Cat, Cutout, Flowmaster
MOGOB APPROVED!
BONE APPROVED!
VANBIBBER APPROVED!
KRISTEN APPROVED!
Vice Prez.
Team Black...TEAM EMO
sigpic
Come on kids! Get a Calendar!Comment
-
Re: problem after cam install
Ryan, I don't think I'll need your help for my head swap then , if you produce work skills like that.J/K I hope everything goes good because I will need your help with the head swap and lower intake. Good luck, SteveOriginally posted by Meatyshells View Post08' L76 6.0L 4X4 Chevy EXT.Cab LTZ Vortec MAX with Snug top cover, Dynomax exhaust,Hptuners& K&N intake
96' Camaro M5 to A4 conversion, alot of mods . GT35R Turbo full suspension. Built engineComment
-
Re: problem after cam install
just need to put on the coil packs and wire up the spark plugs
then re oil and add coolant, wish me luck.
Abbott long tubes,homemade true duals,slp ram air,whisper lid,eibach springs,kyb shocks,BMR subframe connectors, BMR LCA reloc brackets,BMR LCAs. T-top/manual convertedComment
-
Re: problem after cam install
Good luck.08' L76 6.0L 4X4 Chevy EXT.Cab LTZ Vortec MAX with Snug top cover, Dynomax exhaust,Hptuners& K&N intake
96' Camaro M5 to A4 conversion, alot of mods . GT35R Turbo full suspension. Built engineComment
-
-
Re: problem after cam install
well i started the car and it ran good for a while and then out of no where it just turned off.
Scanned the car and now its throwing
P1514 Airflow to TP Sensor Correlation High
and
P0101 Mass Air Flow (MAF) Sensor Performance
i delete the codes it runs good untill they come back and then the car doesnt want to run right
Abbott long tubes,homemade true duals,slp ram air,whisper lid,eibach springs,kyb shocks,BMR subframe connectors, BMR LCA reloc brackets,BMR LCAs. T-top/manual convertedComment
-
Re: problem after cam install
that sucks man....I would definetly look into your tunning for sure if you have re-put everything together and you are sure it is all in there properly
2002 SOM Z28 Camaro - 12.9 @ 104 mph
1996 3800 Camaro - 13.43 @ 100.77 mph
Project Cars | How To Guides | Scratch Repair | Synthetic OilComment
-
Re: problem after cam install
im going to start with cleaner the maf sensor, what is a good way to clean it? can i just spray brake cleaner on it?
Abbott long tubes,homemade true duals,slp ram air,whisper lid,eibach springs,kyb shocks,BMR subframe connectors, BMR LCA reloc brackets,BMR LCAs. T-top/manual convertedComment
-
Re: problem after cam install
they actually make maf cleaner but you can just use electric parts cleaner
Comment
-
Re: problem after cam install
or rubbing alcohol and a q-tip...Comment
-
Re: problem after cam install
you still on stock injectors?Comment
-
Re: problem after cam install
yes i am
Abbott long tubes,homemade true duals,slp ram air,whisper lid,eibach springs,kyb shocks,BMR subframe connectors, BMR LCA reloc brackets,BMR LCAs. T-top/manual convertedComment
-
Re: problem after cam install
Too bad your a 00' on the stock injectors Meaty, I have some 24lb and 36lb injectors in the garage, but you use a different type than I do.08' L76 6.0L 4X4 Chevy EXT.Cab LTZ Vortec MAX with Snug top cover, Dynomax exhaust,Hptuners& K&N intake
96' Camaro M5 to A4 conversion, alot of mods . GT35R Turbo full suspension. Built engineComment
Comment