replaced I.M. gasket, car wont idle right. air leak? - FirebirdV6.com/CamaroV6.com Message Board

Announcement

Collapse
No announcement yet.

replaced I.M. gasket, car wont idle right. air leak?

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

  • #16
    Re: replaced I.M. gasket, car wont idle right. air leak?

    Alrighty, I took pics of just my 02 since you said you had no problems with your MAF screen removed on top of no vacuum lines to the left of the throttle body.

    Anyways, I'm thinking that if you had a leak to the left of your throttle body, it could be from the plate that has pop rivets in it somehow coming loose. I'm pretty sure that's the mechanism that controls the throttle plate.

    Either way, here are the pics.

    Left of throttle body. Nothing much there.


    Right of throttle body. I'm guessing that's the IAC valve? Any help? Either way, there's a vacuum reference there.


    Then there's the Map sensor line to the FPR. lol btw, does anyone know where that line on the other side of the map sensor that runs to the left goes to? I think i traced it to the horn once? I can't remember.

    TEAM C6V6

    Comment


    • #17
      Re: replaced I.M. gasket, car wont idle right. air leak?

      I think there is one vac. line that goes to the canister. I think that is by the horn area.
      08' L76 6.0L 4X4 Chevy EXT.Cab LTZ Vortec MAX with Snug top cover, Dynomax exhaust,Hptuners& K&N intake
      96' Camaro M5 to A4 conversion, alot of mods . GT35R Turbo full suspension. Built engine

      Comment

      Latest Topics

      Collapse

      There are no results that meet this criteria.

      FORUM SPONSORS

      Collapse
      Working...
      X