Welcome to the FirebirdV6.com/CamaroV6.com forums.
You are currently viewing our boards as a guest which gives you limited access to view most discussions and access our other features. By joining our free community you will have access to post topics, communicate privately with other members (PM), respond to polls, upload content and access many other special features. Registration is fast, simple and absolutely free so please, join our community today!
If you have any problems with the registration process or your account login, please contact contact us.
If this is your first visit, be sure to
check out the FAQ by clicking the
link above. You may have to register
before you can post: click the register link above to proceed. To start viewing messages,
select the forum that you want to visit from the selection below.
Ok to make a long story shot, i had a motor swapped into my car. The motor that was in it had a gt2 cam in it, and i told the mechanic to swap it over. He calls me and tells me that he swapped the new motor in and didnt put the cam in because "it was messed up". I picked the cam up, and honestly think its fine. What do you guys think? You can see a couple small scuffs, and it looks like some circular marks (these marks do not even catc a fingernail and it feels smooth to rub over it.) Either way, heres some pics let me know what you think.
dont new cams have to have a breakin, like upon start up immediately bring the motor up to like 3000 rpms...
Team NoVa
2000 Firebird- Intake, Pacesetters, !cat, full 2.5 to flowcrapster, 1.9 rockers, LS6 springs and Intense modded retainers, WS6 speedlines, T/A bumpers and hatch, 5 spd swapped, SOON TO BE nitrous'd and cammed.
edit* and thats just for the lobes so they can wear properly.. those pics indicate something happened to the cam journals
cool, thanks.
nother q, do our cars have roller or flat tappet?
Team NoVa
2000 Firebird- Intake, Pacesetters, !cat, full 2.5 to flowcrapster, 1.9 rockers, LS6 springs and Intense modded retainers, WS6 speedlines, T/A bumpers and hatch, 5 spd swapped, SOON TO BE nitrous'd and cammed.
took it to the speed/machine shop. The guy said its not that bad at all (maybe the pics make it look worse then it is). he is going to polish it up and said it should be perfectly fine to use.
2000 Firebird- Intake, Pacesetters, !cat, full 2.5 to flowcrapster, 1.9 rockers, LS6 springs and Intense modded retainers, WS6 speedlines, T/A bumpers and hatch, 5 spd swapped, SOON TO BE nitrous'd and cammed.
just for some info, there is basically 4 types of cams.. 2 groups, flat tappet, and roller, and each type can be either hydraulic (which is basically a spring in the lifter that pumps up at higher rpm, letting the car have lower lift/duration at lower rpms) and solid (which the lifter is basically a hunk of metal with oil holes drilled through it.. you will get the same lift/duration at all rpms, unless the cam is designed to launch the lifter off of the lobes)
took it to the speed/machine shop. The guy said its not that bad at all (maybe the pics make it look worse then it is). he is going to polish it up and said it should be perfectly fine to use.
thats good to hear, the pictures made it look pretty bad
just for some info, there is basically 4 types of cams.. 2 groups, flat tappet, and roller, and each type can be either hydraulic (which is basically a spring in the lifter that pumps up at higher rpm, letting the car have lower lift/duration at lower rpms) and solid (which the lifter is basically a hunk of metal with oil holes drilled through it.. you will get the same lift/duration at all rpms, unless the cam is designed to launch the lifter off of the lobes)
[/QUOTE]
Also the hydraulic lifters allow lash. ie- with solid lifters there is a need to set valve lash for expanding metal as the motor heats up.
Team NoVa
2000 Firebird- Intake, Pacesetters, !cat, full 2.5 to flowcrapster, 1.9 rockers, LS6 springs and Intense modded retainers, WS6 speedlines, T/A bumpers and hatch, 5 spd swapped, SOON TO BE nitrous'd and cammed.
Haven’t done anything on the Camaro, but put LEDs on my truck headlights . And my oil pressure sensor went out on the truck so going to fix that this...
Haven’t done anything on the Camaro, but put LEDs on my truck headlights . And my oil pressure sensor went out on the truck so going to fix that this...
We process personal data about users of our site, through the use of cookies and other technologies, to deliver our services, personalize advertising, and to analyze site activity. We may share certain information about our users with our advertising and analytics partners. For additional details, refer to our Privacy Policy.
By clicking "I AGREE" below, you agree to our Privacy Policy and our personal data processing and cookie practices as described therein. You also acknowledge that this forum may be hosted outside your country and you consent to the collection, storage, and processing of your data in the country where this forum is hosted.
Tweet
Comment