Balance shaft - FirebirdV6.com/CamaroV6.com Message Board

Announcement

Collapse
No announcement yet.

Balance shaft

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

  • #16
    Re: Balance shaft

    i think im going to do that.
    Team NoVa

    2000 Firebird- Intake, Pacesetters, !cat, full 2.5 to flowcrapster, 1.9 rockers, LS6 springs and Intense modded retainers, WS6 speedlines, T/A bumpers and hatch, 5 spd swapped, SOON TO BE nitrous'd and cammed.

    Comment


    • #17
      Re: Balance shaft

      The motor I'm doing has the balance shaft removed and I've used a threaded plug behind the front of the motor, where the oil feed to the shaft is. Had to, running the double roller. There is a thread that kind of shows where the hole is. You can see it off to the side of the shaft from the front. It really sounds more complicated than it really is. I can't remember what the thread ID is though. Apologies.

      Comment


      • #18
        Re: Balance shaft

        just take the grear off, did it on shodowns car can't even tell... (stock cam)

        if you have a cam you won't notice anyway
        www.turbov6camaro.com
        1997 3800 Series II Camaro
        4600 Stall for my ride to the mall :chug:
        7.18 @ 99.77 1/8 -1.8x sixty (current quickest v6 fbod)
        11.23 @ unk 5 1/4 - 7.19 1/8 - 1.83 sixty

        Comment

        Latest Topics

        Collapse

        There are no results that meet this criteria.

        FORUM SPONSORS

        Collapse
        Working...
        X