VS cam ??

[BAD BIRD]

anyone here has the VS cam from ZZperformance????
whats your input on these cam

[pace2006]

Re: VS cam ??

ssms5411 has it in his car. A pretty good cam from what I've heard. Does well with boost and loves nitrous. Not too lopey either.

[T-Mill]

Re: VS cam ??

I have one... but it's sitting on my kitchen table right now...

[ssms5411]

Re: VS cam ??

I've had it for about 7 years now, has a nice lobe to it , have to bump the idle up about 100 rpms so it doesn't set off a PO300 at idle. It did great with the powerdyne and it did love the nitrous and will soon be getting turboed. I run the RKsport headers with 1.75" primaries and the extra exhaust the VS puts out seems to like the bigger primaries, the other headers are 1.5" primaries. I ran the Powerdyne with 220 degree IAT's and it still dynoed 288HP/330 TQ and I never dynoed after my 928 rebuild which uped the power of it which I would guess over 300 at the wheels and 340-350 TQ. The AZ temp was bad for it. I went with nitrous and the car with a 125 shot felt like it made at least 30-50 more HP with 26-27 degrees timing, I was spinning my 16" rims through 2nd and 3rd gear trying to go sideways, then I got 17" rims with 275/40/17 BFG G-force tires and a UMI TQ arm and it would just spin in 2nd going straight alittle and 3rd would grab. I plan on running 10-12 PSI with the GT35R turbo and hope to get me to 350-400 WRHP since it is a street car and not a track car. I figure a 2800-2900LB car with that much power should take care of the new camaros and old and some Vettes on the street. All I can say it is a all around great cam even N/A it pulls hard , it is basicly a bigger stock cam.

[calvo]

Re: VS cam ??

i got one i LOVE it great with nitrous on a 75 shot i put down somewhere around 254hp (ball park was a few years ago) with other basic bolt ons and gears.

[BAD BIRD]

Re: VS cam ??

i just ordered the GT2 Cam