-
headers, high flow cat, slp loudmouth
powerdyne supercharger 6psi
GT2 cam. all done by myself :banana:
Hell yea
-
Re: engine wont turn
damn the bolts on the heads are tight as ****headers, high flow cat, slp loudmouth
powerdyne supercharger 6psi
GT2 cam. all done by myself :banana:
Hell yea
Comment
-
Re: engine wont turn
the valve could have hit the piston...Team NoVa
2000 Firebird- Intake, Pacesetters, !cat, full 2.5 to flowcrapster, 1.9 rockers, LS6 springs and Intense modded retainers, WS6 speedlines, T/A bumpers and hatch, 5 spd swapped, SOON TO BE nitrous'd and cammed.Comment
-
Re: engine wont turn
i hope the cylinder is in good shape. i can easily replace a valveheaders, high flow cat, slp loudmouth
powerdyne supercharger 6psi
GT2 cam. all done by myself :banana:
Hell yea
Comment
-
Re: engine wont turn
well, hope for the best...but if something was bouncing around in there, you may need a new piston and possibly a bore, which means alll new pistons...just hope for the best.Team NoVa
2000 Firebird- Intake, Pacesetters, !cat, full 2.5 to flowcrapster, 1.9 rockers, LS6 springs and Intense modded retainers, WS6 speedlines, T/A bumpers and hatch, 5 spd swapped, SOON TO BE nitrous'd and cammed.Comment
-
Re: engine wont turn
this is what happen when i snapped a valve....
wheres the piston?!?!?
it was in my oil pan sweet
Abbott long tubes,homemade true duals,slp ram air,whisper lid,eibach springs,kyb shocks,BMR subframe connectors, BMR LCA reloc brackets,BMR LCAs. T-top/manual convertedComment
-
Re: engine wont turn
Yea, Id guess a broken valve too.*Matt
Old people shouldnt use the internet.Comment
-
Re: engine wont turn
not reallyOriginally posted by jimmysprinkle View Post
if it was severe enough, then he would need new pistons and a bore.. if it wasnt very bad, he could have just punched a hole in the pistonComment
-
Re: engine wont turn
damn. i dont have any metal shavings in my oil
i will finish up the head removal tomorrow morningheaders, high flow cat, slp loudmouth
powerdyne supercharger 6psi
GT2 cam. all done by myself :banana:
Hell yea
Comment
-
Re: engine wont turn
was your cylinder ok ???Originally posted by Meatyshells View Postthis is what happen when i snapped a valve....
wheres the piston?!?!?
it was in my oil pan sweet
headers, high flow cat, slp loudmouth
powerdyne supercharger 6psi
GT2 cam. all done by myself :banana:
Hell yea
Comment
-
Re: engine wont turn
Thats why I asked about the valve springs... If they look normal
then the valve didn't break like meatys. Thats not to say that it
didn't come in contact with the piston though.Comment
-
headers, high flow cat, slp loudmouth
powerdyne supercharger 6psi
GT2 cam. all done by myself :banana:
Hell yea
Comment
-
Re: engine wont turn
this cam install is been a nightmare since day oneheaders, high flow cat, slp loudmouth
powerdyne supercharger 6psi
GT2 cam. all done by myself :banana:
Hell yea
Comment
-
Re: engine wont turn
Are you 100% sure you installed them cam right?Comment
-
Re: engine wont turn
yes i am, if there is nothing inside the cylinder i will go ahead and remove the front coverOriginally posted by caspernicus View PostLast edited by BAD BIRD; 06-29-2009, 06:01 PM.headers, high flow cat, slp loudmouth
powerdyne supercharger 6psi
GT2 cam. all done by myself :banana:
Hell yea
Comment
Tweet
-
So my truck is finally getting some work done, after 17 years, Oil pressure sensor went out and it’s located under the lower intake manifold. Have to...1 week ago -
Hey guys. For starters I’ve always been a big car guy, I love all types of cars and can appreciate all types of engineering. I’ve always been a Chevy...3 weeks ago -
Getting a message saying invalid interface, haven’t used it since last year probably November. First time in 23 years I had a problem. Going to get...3 weeks ago
-
-
need help finding a balancer and a replacement balancer bolt. im at a lost after confusing myself researching.4 weeks ago
Comment