Welcome to the FirebirdV6.com/CamaroV6.com forums.
You are currently viewing our boards as a guest which gives you limited access to view most discussions and access our other features. By joining our free community you will have access to post topics, communicate privately with other members (PM), respond to polls, upload content and access many other special features. Registration is fast, simple and absolutely free so please, join our community today!
If you have any problems with the registration process or your account login, please contact contact us.
If this is your first visit, be sure to
check out the FAQ by clicking the
link above. You may have to register
before you can post: click the register link above to proceed. To start viewing messages,
select the forum that you want to visit from the selection below.
No I had to cut the ABS and radio control harness down flat so the hub would fit on. Still I can't believe I don't have a ABS light on , I guess when you take it all out it goes away.
08' L76 6.0L 4X4 Chevy EXT.Cab LTZ Vortec MAX with Snug top cover, Dynomax exhaust,Hptuners& K&N intake
96' Camaro M5 to A4 conversion, alot of mods . GT35R Turbo full suspension. Built engine
The hub is crap , if you turn the steering right it will turn on the right turn signal and the left side won''t work. I see that I need to grind off the plastic piece where the hub turns , only draw back I see is when I turn it won't click off. I will have to do it manually. Josh York says to send him the hub at my expense and he will see about getting a Sparco one. I emailed him and saud if he doesn't return for shipping, since it was the wrong part I will return the steering wheel and hub for a full refund through paypal. What a dousch bag. I think I can get it to work with the current hub with some modding but why should I , its like he sent me a used hub with now screws or anything. I say buyer beware of FTTP! Hes a joke.
08' L76 6.0L 4X4 Chevy EXT.Cab LTZ Vortec MAX with Snug top cover, Dynomax exhaust,Hptuners& K&N intake
96' Camaro M5 to A4 conversion, alot of mods . GT35R Turbo full suspension. Built engine
Steve, I installed the exact same parts on my car and had not problems at all. Wonder if you are doing it right...maybe not. As I said with the hub, send it back and I will refund the price of the hub and shipping. Not a problem at all. Good luck on finding a Sparco hub though. BTW, the bolts that hold the wheel to the hub come with the steering wheel because they are steering wheel sprcific...NOT with the hub. Before you start slamming people, get your information correct.
- Josh<br />If you have any questions or need installation pics/help, e-mail me: Viper98885@aol.com<br /><a href=\"http://Camaroz28.cardomain.com/id/viper98885\" target=\"_blank\">\'93 Camaro Hardtop</a><br /><a href=\"http://Camaroz28.cardomain.com/id/01lincolnls8\" target=\"_blank\">\'01 Lincoln LS8 Sport</a><br />\'00 Yamaha YZF-R6<br /><a href=\"http://www.ftpp.net\" target=\"_blank\">Full Throttle Performance</a>
Steve, I installed the exact same parts on my car and had not problems at all. Wonder if you are doing it right...maybe not. As I said with the hub, send it back and I will refund the price of the hub and shipping. Not a problem at all. Good luck on finding a Sparco hub though. BTW, the bolts that hold the wheel to the hub come with the steering wheel because they are steering wheel sprcific...NOT with the hub. Before you start slamming people, get your information correct.
and what do you have to say to me josh about the stuff you owed me for how long now??...i understand you said you have to "look" for it but how long is that gonna take???
and what do you have to say to me josh about the stuff you owed me for how long now??...i understand you said you have to "look" for it but how long is that gonna take???
All of your items were shipped long ago. What have you still not received?
- Josh<br />If you have any questions or need installation pics/help, e-mail me: Viper98885@aol.com<br /><a href=\"http://Camaroz28.cardomain.com/id/viper98885\" target=\"_blank\">\'93 Camaro Hardtop</a><br /><a href=\"http://Camaroz28.cardomain.com/id/01lincolnls8\" target=\"_blank\">\'01 Lincoln LS8 Sport</a><br />\'00 Yamaha YZF-R6<br /><a href=\"http://www.ftpp.net\" target=\"_blank\">Full Throttle Performance</a>
All of your items were shipped long ago. What have you still not received?
lol really?? why havent you answered my calls or text?....or even gotten a tracking # or something saying you sent it?...well in any case i still never got the caliper bracket i was missing....the anti rattle clips....you can forget about that cuz i ended getting that myself...i also still havent gotten the rear sway bar and the stainless steel brake hoses...and steve im sorry about spamming your thread...
lol really?? why havent you answered my calls or text?....or even gotten a tracking # or something saying you sent it?...well in any case i still never got the caliper bracket i was missing....the anti rattle clips....you can forget about that cuz i ended getting that myself...i also still havent gotten the rear sway bar and the stainless steel brake hoses...and steve im sorry about spamming your thread...
We have been through this before. E-MAIL ME. You have my E-mail address and have used it in the past. Send me a note and I will reply as soon as I can.
- Josh<br />If you have any questions or need installation pics/help, e-mail me: Viper98885@aol.com<br /><a href=\"http://Camaroz28.cardomain.com/id/viper98885\" target=\"_blank\">\'93 Camaro Hardtop</a><br /><a href=\"http://Camaroz28.cardomain.com/id/01lincolnls8\" target=\"_blank\">\'01 Lincoln LS8 Sport</a><br />\'00 Yamaha YZF-R6<br /><a href=\"http://www.ftpp.net\" target=\"_blank\">Full Throttle Performance</a>
We have been through this before. E-MAIL ME. You have my E-mail address and have used it in the past. Send me a note and I will reply as soon as I can.
yea we have been through this before and like always you want yourself to not look like the wrong one when indeed you are...in the past i..
emailed you: dont get a response...
pm'd you on here: mail box is always full of i dunno what...
soo i used to call and text you and got through with you...then when it came down to the last parts you gotta send..it was like your dead or something..i sent you texts and called you everyday for 2 weeks...i did that and not email cuz i know you have to be getting the calls and texts but not replying to me..and i wouldnt email cuz in the past that was no use...all i want is my parts and thats it ill leave you alone..i mean come on bro how long did i pay your for everything and look when im getting my stuff?
you do have good stuff on your site..i wont lie about that..but its a surprise its still running after how many ppl having problems with you..you need to manage things better :spank:
Steve, I installed the exact same parts on my car and had not problems at all. Wonder if you are doing it right...maybe not. As I said with the hub, send it back and I will refund the price of the hub and shipping. Not a problem at all. Good luck on finding a Sparco hub though. BTW, the bolts that hold the wheel to the hub come with the steering wheel because they are steering wheel sprcific...NOT with the hub. Before you start slamming people, get your information correct.
Well they didn't come with the steering wheel either(I guess they forgot), the hub sits too far down and will turn on the right turn signal when turning I noticed the hub has already had wear markes on it from where someone had used it before down where the hub sits against the steering shaft. I wonder if they paint the hubs like that? (the used look) before you sell something and label it Sparco on your site and charge $30 more than Momo you should probably think " I'm ripping off the customer" . Since you emailed me and and said they don't make Sparco adapters anymore good luck finding one. You still have COMP Cam 1.7 rockers listed on your site as since I returned a set from Comp Cams about 2 years ago from your site, which were wrong and Comp Cams emailed me that they don't make a set for the 3.8. What would of happened if I installed them and they blew up my engine? Would you pay for it? Probably not in my lifetime, they are custom made. Why is that still on your site? Your a rip off. I'm not going to bother sending this one back (since I would have to dispute you to paypal), I already figure out how to make it work right, paid $98 for a $60 adapter nice mark up. You need to change that on your site too, Momo adapter (with modifcation) No Sparco adapters. BTW I'll make sure this is posted on all V6 and V8 forums, since you wanted to take it on the forum level and not email. :wavey:
08' L76 6.0L 4X4 Chevy EXT.Cab LTZ Vortec MAX with Snug top cover, Dynomax exhaust,Hptuners& K&N intake
96' Camaro M5 to A4 conversion, alot of mods . GT35R Turbo full suspension. Built engine
Well they didn't come with the steering wheel either(I guess they forgot), the hub sits too far down and will turn on the right turn signal when turning I noticed the hub has already had wear markes on it from where someone had used it before down where the hub sits against the steering shaft. I wonder if they paint the hubs like that? (the used look) before you sell something and label it Sparco on your site and charge $30 more than Momo you should probably think " I'm ripping off the customer" . Since you emailed me and and said they don't make Sparco adapters anymore good luck finding one. You still have COMP Cam 1.7 rockers listed on your site as since I returned a set from Comp Cams about 2 years ago from your site, which were wrong and Comp Cams emailed me that they don't make a set for the 3.8. What would of happened if I installed them and they blew up my engine? Would you pay for it? Probably not in my lifetime, they are custom made. Why is that still on your site? Your a rip off. I'm not going to bother sending this one back (since I would have to dispute you to paypal), I already figure out how to make it work right, paid $98 for a $60 adapter nice mark up. You need to change that on your site too, Momo adapter (with modifcation) No Sparco adapters. BTW I'll make sure this is posted on all V6 and V8 forums, since you wanted to take it on the forum level and not email. :wavey:
thanks steve! finally im not the only one that thinks hes a rip off!:mad:
Finally got my steering adapter , which is not Sparco its a Momo , I hate when people advertize one product and send you another, I didn't even get the 6 bolts to connect the 2 . I emailed Fttp Josh York who I will see what he says from his email back. But the Momo adapter says # K 2401 on the side. Will get pics when done. So beware of Fttp , I could of bought the Momo adapter at checker for $60 instead of $98 from his online store. This is the second time he has had mislabled products, last time was the 1.7 roller rockers he had for $300 which they never made for the 3.8. LOL Install wasn't hard at all about 20-30 mins. and thats just becuase of cutting cripping wires for the horn. I put a pic of the hub which does fit nice and tight, I see why there wasn't any instructions for any of the parts , pretty self explanatory.
Steve, you did not pay $98 for a steering wheel adapter. You paid $72.93. Check your invoice.
- Josh<br />If you have any questions or need installation pics/help, e-mail me: Viper98885@aol.com<br /><a href=\"http://Camaroz28.cardomain.com/id/viper98885\" target=\"_blank\">\'93 Camaro Hardtop</a><br /><a href=\"http://Camaroz28.cardomain.com/id/01lincolnls8\" target=\"_blank\">\'01 Lincoln LS8 Sport</a><br />\'00 Yamaha YZF-R6<br /><a href=\"http://www.ftpp.net\" target=\"_blank\">Full Throttle Performance</a>
I stand corrected, it was 72.93 and I'm sending it back , becuase it was used showing wear and had no adapter plate , bolts or allen wrench or instructions and also came in a old fedex bag inside a USPS box. I found them on ebay which they come in a package with everything for $71.95 with $3.95 shipping and come in a plastic package and instructions you have to actually open already ordred it and will be getting it tommorow. Also for the board members if you get a package in the mail from where you bought something , and then your going to return it , wouldn't you return it in the same package? I think its pretty sad to recieve a used wrong named adapter and pay new prices. Also FTPP says the factory Momo sent me the adapter although it says it came from his place, I know when I ordered Comp Cam 130lb springs they came from Comp Cam right on the address slip and my Sparco steeering wheel came from Sparco , but he insists that it came from the factory , if so why would I send it back to him ? It would go back to the factory if it came from there. Buyer beware is all I have to say and I did do a paypal dispute just to make sure I get my money back for the adapter and return dhipping since he won't prepay for the return shipping no RMA #. Heres some pics on how and what I recieved for a new Momo adapter, I'm thinking of sending the pics to Momo. I sent pics to Momo and they were really pissed , will see what happens now.
08' L76 6.0L 4X4 Chevy EXT.Cab LTZ Vortec MAX with Snug top cover, Dynomax exhaust,Hptuners& K&N intake
96' Camaro M5 to A4 conversion, alot of mods . GT35R Turbo full suspension. Built engine
Got back from alittle 4 day outting, and got my correct Momo adapter , actually came in a box with bolts and accessories for the steering wheel , will try to get it on tomorrow and see the difference. Its pretty cool had all the ground wire and power for the steeering wheel horn and everything you need. I'm glad I returned the crap used one from FTPP. Which he still hasn't returned my money, I sent it signed delievery so there would be no excuse I didn't get it and gave him the tracking # and they tried 3 times to drop it off, he wasn't there so he has 5 days to pick it up or it gets returned to me, so it looks like I will escalate the paypal dispute. I'm going to post pics of the new adapter I got and how it came so you guys can compare the one from FTPP and one from ebay seller which was cheaper in price and shipping. Good note Momo is going to get back with me , they wanted some more info. on the matter. Will post pics in a bit.
08' L76 6.0L 4X4 Chevy EXT.Cab LTZ Vortec MAX with Snug top cover, Dynomax exhaust,Hptuners& K&N intake
96' Camaro M5 to A4 conversion, alot of mods . GT35R Turbo full suspension. Built engine
Steve, I installed the exact same parts on my car and had not problems at all. Wonder if you are doing it right...maybe not. As I said with the hub, send it back and I will refund the price of the hub and shipping. Not a problem at all. Good luck on finding a Sparco hub though. BTW, the bolts that hold the wheel to the hub come with the steering wheel because they are steering wheel sprcific...NOT with the hub. Before you start slamming people, get your information correct.
They come with the steering wheel huh, then why did I get a actual box that says MOMO and it has the bolts and allen wrench and adapter plate for the horn and wires for the horn? You are a rip off , you just lied right there in your post. Stop selling used parts as new, I will turn you in to the Better Buisness Beauro, paypal will not be the end, I have the pics and your statements here and emails. yes you just got slammed and my info is correct. Also wheres my refund?
08' L76 6.0L 4X4 Chevy EXT.Cab LTZ Vortec MAX with Snug top cover, Dynomax exhaust,Hptuners& K&N intake
96' Camaro M5 to A4 conversion, alot of mods . GT35R Turbo full suspension. Built engine
We process personal data about users of our site, through the use of cookies and other technologies, to deliver our services, personalize advertising, and to analyze site activity. We may share certain information about our users with our advertising and analytics partners. For additional details, refer to our Privacy Policy.
By clicking "I AGREE" below, you agree to our Privacy Policy and our personal data processing and cookie practices as described therein. You also acknowledge that this forum may be hosted outside your country and you consent to the collection, storage, and processing of your data in the country where this forum is hosted.
Comment