will this work

[bobc04]

Hey guys,
i wanna get some new wheels for my car. i was gonna go with the tsw vairano. i know the bolt pattern is 5X120. my fren said i should look for the center bore and see if it will fit before i do anything. does anyone know if this will work?

[unvmyrs]

Re: will this work

I did a quick search and saw that the bolt pattern is 5x100. That conflicts with your 5x120. Thats for what its worth. I don't know if they'll fit, and am thinking they won't.

[techsan23]

Re: will this work

Im not sure what kind of car you have, but 4th gen bolt pattern is 5 on 4.75" or in metric: 5 on 120.65mm. What size wheel are you looking at?

[bobc04]

Re: will this work

well i got a '99 camaro. i think the bolt pattern is 5x120. i was loooking to get the tsw vairano. they have it in my cars bolt pattern but when i tried to order it through discounttiredirect.com and they said it wouldnt fit because of the bolt pattern being different and i got confused

[bobc04]

Re: will this work

basically what i am looking for is an answer to this question. if the wheel is available in the same bolt pattern as my car, will it fit?

[bigairboarder44]

Re: will this work

Camaro bolt pattern: 5x120.65
TSW bolt pattern: 5x120

Some say that will fit properly, others say it won't.

[techsan23]

Re: will this work

basically what i am looking for is an answer to this question. if the wheel is available in the same bolt pattern as my car, will it fit?

Do you know the diameter, width and offset of the wheel, or maybe a link?

[bobc04]

Re: will this work

heres the link.

http://www.tsw.com/app_guide_results...t&model=Camaro

i wanted to get the vairano 18x8 35 offset

[TheGr8Schlotzky]

Re: will this work

That won't look good without some spacers. With such a low offset, it will be tucked into the fender quite a bit. You may have some rubbing problems on the inside as well.

NTM 120mm and 120.65mm are different sizes. You can make them fit, but different people will tell you different things on whether it's safe or not.

[ACiFiC]

Re: will this work

Love the deep dish some of those.

[ssms5411]

Re: will this work

Love the deep dish some of those.

X2 on the deep dish.

[Tlutz]

Re: will this work

Make sure the hub diameter is the same or get bushings to adapt them. the wheels register on the hubs and the bolts hold the rim to the car. If the wheel has a larger diameter the lugnuts will work lose. Of course if the wheel has a smaller diameter they won't fit.

[bobc04]

Re: will this work

thanks for all the input guys.... so if the tsw vairano doesn't work out. does anyone know anything similar?

[ssms5411]

Re: will this work

If you need nice lug nuts , Gorilla lug nuts are really nice , I picked some up for mine and installe them on the rear. I don't remember where though? LOL But they are chrome and were about $50.

[LS2GTOmang]

Re: will this work

That won't look good without some spacers. With such a low offset, it will be tucked into the fender quite a bit. You may have some rubbing problems on the inside as well.

High offset mean the wheel will be tucked in more. The higher the offset, the more the wheel is tucked in. The lower the offset, the more the wheel will stick out.

Those wheels 18x8 with 35mm offset will fit, but will they fit properly? Who knows lol