Tweet
Anyone happen to know or have the handy the nuts and bolt(s) that mount the headlight's to the bracket's? Figure 3 months after buying them maybe I'll finally get them installed. And no it's not as simple as using the hardware that's on the lights now. It all went AWOL so there's mismatched nuts and bolts that leave them barely hanging on and pointing at the ground so the high beams are always on to see where the f I'm going.
-
Let's flip a coin. Heads I get tail, Tails I get head. -
Re: Headlight Hardware
You got a local boneyard? I'd send you mine but I'm pretty sure I just threw it all away. This is also more of a wanted thread. -
Re: Headlight Hardware
Not wanting want to buy new hardware. Just need to know the sizes. Either that or I'm gonna have to take a headlight to the store and play around with the size guage till I get it right, was just hoping to avoid that lol.Let's flip a coin. Heads I get tail, Tails I get head.Comment
-
Re: Headlight Hardware
Ah, gotcha. I say just go to the store and get a few 8mm, 10mm, and maybe 13mm bolts. That's bound to cover it on these cars.Comment
-
Re: Headlight Hardware
Thanks, was just thinking 10 and 12 but 13 is a good bet too. I'll probably start that way rather than carry a headlight into advance auto. Some things are harder to explain than others.Let's flip a coin. Heads I get tail, Tails I get head.Comment
-
Re: Headlight Hardware
I'd never run into a 12mm bolt on my Camaro; only 7, 8, 10, 13, 15, 17, and a 23mm I think on the suspension.Comment
Comment