My 97 FBaby pictures

[F* Bodies hit the roof]

Here are some of the pictures I took of my
baby. What do u guys think about it?
By the way, I am getting new wheels...
http://photos.yahoo.com/bc/leera2k1/...o!+Photo+Album

[ April 10, 2002: Message edited by: F* Bodies hit the roof ]</p>

[WickEdSix9838]

I like that TA spoiler, is it just a regular TA spoiler grafted onto your old one? and those Grand Prix wheels look bad *** , just too bad they werent 18's

[ April 10, 2002: Message edited by: WickEdSix9838 ]</p>

[F* Bodies hit the roof]

Yes it is a TA spoiler that comes from
a regular TA hatch. The TA's spoiler can
be removed from the TA hatch. I installed
it right on top of my regular beavertail
hatch. If you look close to the picture
where my spoiler is shown, you can see
that it is popped out; unlike how it is
regularly installed on a TA's hatch, brought
all the way to the hatch's glass.
Actually, here is a picture of how it used
to look like before I painted it.
http://www.nobispro.com/carpics/pics/untitled.jpg

[Fusion]

The T/A Spoiler and Hood really make it look clean and sharp! Nice Job man. [img]graemlins/thumbsup.gif[/img]

[mw02]

No offense but that spoiler is REALLY ugly. Ah well who cares what i think. its huge!

:eek:

[epic]

Car looks smooth man.

I heard you can shave down your old spoiler and prop the new one on top. It'll make it look a lot slicker with doing that. Just a suggestion, nice car though. Love da' hood.

[WickEdSix9838]

i wish i could get the Mecham spoiler, I think its the tightest spoiler ive ever seen!!

[F* Bodies hit the roof]

Yeah actually, that spoiler that Batman
showed us on that Knightrider website
is a shaved TA spoiler. I noticed that
the brake light piece of the middle of the spoiler was taken out. It does look nice.
But I want mine to look different....

[WickEdSix9838]

how is it attached?? with screws?? did you just have to pull the plastic off of the inside, drill screw it?

[F* Bodies hit the roof]

The TA spoiler comes with attached screws
that don't come off. When you see the
back of the spoiler, there is like two
stems attached to my beavertail. I drilled
a hole for each stem into the beavertail wing.
I had to put nuts and washers underneath the
beavertail hatch to secure the screw going to
each stem. The sides were tricky to secure on
I had to put small brackets to the middle
of each side of the spoiler. If you look
from underneath the TA spoiler you can
see the small brackets. But you can not
see it if you are standing of knealing.
Basically it's a customized thing I did
on my own.

[W68Firebird97]

Its cool and all, but you need to get the rear ground fx to compliment the side and front skirt.

[RaVeN1469]

I have to give you this, I've never seen a car like yours. It looks real good. From one angle that fin doesn't look to good but other than that i like it. Theres just one little thing that doesn't sit right with me and I can't figure it out. Looks good