Calipers Done, + Opinions underhood - FirebirdV6.com/CamaroV6.com Message Board

Announcement

Collapse
No announcement yet.

Calipers Done, + Opinions underhood

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

  • Calipers Done, + Opinions underhood

    http://www.cardomain.com/ride/610005/3
    take a look at them calipers [img]smile.gif[/img]


    UnderHood:

    Advanced Auto Parts:
    Purple-lish 3/8 tubing
    I really like the color better than blue but . . . they don't sell 1/2, or 1 inch + in purple.

    Pep Boys:
    Blue (CHEAP cr@p, easy to put on, but cheaply made material ehhh)

    But they have the sizes I need. . .

    Opinions Please! !
    Should I go Red? I don't know if too much red is bad or good?

    And any other place i can go to get variety of sizes + variety of color?
    1998 Rally Red Camaro
    Manual 5, T-Tops
    Ebony Leather Interior, Kicker Audio System

  • #2
    good job on the calipers. i would of gotten red instead of the purple-ish wire loom.

    EDIT: you can get wiring looms @ http://wiringproducts.com/ you can also by color matching tape.. good luck!

    '95 3.8L A4 PGM. & '95 LT1 M6 PGM. :burn:

    Comment


    • #3
      Personally, I don't like highlighting the mess of wires under the hood with a contrasting loom. If your're set on easily improving the appearance, study some of the wires and see about rerouting them, combining some looms together, running the passenger wires underneath the fender, etc.
      \'98 Camaro V6<br />Appearance... pleasing<br />Performance... just a little extra air.

      Comment


      • #4
        98redcamaro,
        how did that sound deadner work out? Did it cut down on road noise that much. I just got my box in today. "dynamat" 36ft worth

        Comment


        • #5
          good job on the calipers, goes along very nicely
          with the rest of your car

          Comment

          Latest Topics

          Collapse

          • FirebirdGT
            New Site Hosting Issues
            by FirebirdGT
            All - sorry but there seems to be some glitches from moving to a new Host - hopefully they will be fixed soon.

            If needed you can email me...
            1 week ago
          • LETZRIDE
            New Owner!
            by LETZRIDE
            I am happy to announce that I have sold the site to Robert (FirebirdGT). Years ago this site went down when TealV6 had it, I bought it, refreshed it,...
            3 weeks ago
          • LETZRIDE
            Tom Henry RS Pt 4: Suspension Mods, Tires, Wheels, Headers and other Cool Stuff
            by LETZRIDE


            Building the Tom Henry RS
            Part 4: Suspension Mods, Tires, Wheels, Headers and other Cool Stuff.
            By: Hib Halverson


            At the end of Part Three, we changed the valvetrain of the 3.8-liter V6 in the Tom Henry RS. We installed new, Yella Terra "Ultralite" 1.8:1, aluminum roller rocker arms, Katech valve springs and Katech titanium retainers on our 3800 Series II V6.
            Ultralites are nearly 25% lighter than the stock 1.6 rockers and 8% lighter than the SLP aluminum...
            02-07-2020, 11:30 PM

          FORUM SPONSORS

          Collapse
          Working...
          X