Tweet
This "http://rksport.com/prod_detail.php?prod_id=01011046&view=detail" is the spoiler I want and Im a looser so Im not too good with working on my car. Are they easy to install and do they require any drilling?
-
There is fast, too fast, and way too fast. Way too fast is almost fast enough. -
Its pretty easy. This is the best I can do from what I remember.
-Lift up the hatch
-Remove the plastic trim underneath the spoiler. I used a big fork to get the clips to come undone.
-Remove the connector for the light. Should just slide apart.
-Remove the 4 nuts that hold the spoiler on.
-Do the process backwards to re-install.
Cp -
If it's anything liek installing the Trans Am hatches, do a search and look for Snuffolufogus's topic that I used to put my hatch on. It was a little harder than his instructiosn said, but was well worth it, and I didnt have any experienced car people with me spare my teenage friend.Summer:<br />1999 Black Pontiac Firebird Coupe<br />5-speed, T-Tops, Chrome Rims, TA Hatch, Reflective Decals.<br /><br />Winter:<br />2000 Silver Grand Am GT<br />Reflective Black Badge Overlays, chromeComment
-
No, nothing like a firebird. But the ss spoiler has 2 bars running down the center. I want to know if you have to drill two holes into the hatch to mount it. Also, I did search and I found very little.There is fast, too fast, and way too fast. Way too fast is almost fast enough.Comment
-
No drilling, they usually have double sided tape there, but its unecessary.
CpComment
-
So my truck is finally getting some work done, after 17 years, Oil pressure sensor went out and it’s located under the lower intake manifold. Have to...2 weeks ago
Comment