Anyway to take this off? - FirebirdV6.com/CamaroV6.com Message Board

Announcement

Collapse
No announcement yet.

Anyway to take this off?

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

  • #16
    Assume you are talking about that Bentley sticker on the back.

    Heat up a portion of the decal with a hair dryer and begin peeiling. Heat up the next section of the decal and begin peeling and so on until it is removed. If there is residual glue on the paint, use some Goo Gone and gently rub the glue off. Go over the surface with a good cleaner/wax. This process has worked for me on numerous occassions.
    2001 Camaro M5 Coupe(1 of 2,737), no options, Whisper Lid, K&N Air Filter, Free Ram Air, MAFS Screen removed, SLP Manual Fan Switch, 160 thermo, DEE\'s T/B Spacer, EGR Block-off plate, IAT resistor, CAI to EGR air feed, B&M Ripper Shifter, SLP Replacement Grill, T/A Exhaust, SLP five spoke take-off wheels, BMR strut-tower brace, BMR Tunnel Brace, BMR 32/21 front & rear sway bars with poly, BMR Poly/Combo Rear Control Arms, Clear front & rear corners, HPP3 modified 87 Octane program.<p><a href=\"http://www.cardomain.com/id/red2k1\" target=\"_blank\">http://www.cardomain.com/id/red2k1</a>

    Comment


    • #17
      Originally posted by dmiller_2005:
      The dealer that I bought my car from didn't put any stickers on the car.. Well they had like 2 on the windshild that I took off right away. And they had these things that were on the back of the keyless entry that fell off so no worries for me:)
      haha everytime I take my car in for anyting at this one dealer, they put a sticker thing on the back of my keyless entry(its actually a really nice sticker)

      Monday I took my car in for an oil change, they put it on, I ripped it off and threw it in the garbage can right next to the guy.

      Wednesday, double check that my CAT is bad, they have to order the part 2-3 days, they put a sticker on my thing I rip it off and throw it away in front of the guy.

      Friday, get my CAT done, they put another sticker on my keyless entry, I rip it off and throw it away in front of the guy that helped me on wedenesday.

      I hate those things.

      Comment


      • #18
        don't use a razor use fishing string and make a saw like motion downward

        Comment


        • #19
          i had one and used rubbing alchohol and a blastic putie knife
          2000 3.8 A4 Pewter Camaro

          Comment


          • #20
            I have always had good luck with WD40. Just clean the residue off when done.

            Comment


            • #21
              i took mine off with a heat gun....5 seconds...and just use some foam rap that got off the goo that was left over


              87 Firebird RIP
              96 Camaro RS RIP
              94 Patriot Red 1LE Z28 - Sold
              02 WS6 TA - Sold

              Comment


              • #22
                i peeled the sticker off my girlfriend's ecipse with my fingers and used a clay bar to clean it up. it came right off.

                96 V6 A4 Camaro and 99 Z28 A4 Camaro
                Visit My F-Body Page

                Comment


                • #23
                  Heat it up real good with a hair dryer it should come off nicely... then use bug and tar remover or something on the sticky stuff.
                  <a href=\"http://www.cardomain.com/id/maleet\" target=\"_blank\">1998 Silver Firebird</a> <br />Basic mods... nothing real special but it sure looks good!<br /><a href=\"http://www.maleetpobanz.com\" target=\"_blank\">maleetpobanz.com</a>

                  Comment

                  Latest Topics

                  Collapse

                  FORUM SPONSORS

                  Collapse
                  Working...
                  X