Need Help***with Nite Shades Paint!!! - FirebirdV6.com/CamaroV6.com Message Board

Announcement

Collapse
No announcement yet.

Need Help***with Nite Shades Paint!!!

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

  • Need Help***with Nite Shades Paint!!!

    Ok i have been thinking of this but i'm worried about how dark they will be when the lights are on. i don't want you to not be able to see the light. How many coats could i do before it makes the lights not shine as bright? any help is appreciated.

    [ September 30, 2004, 02:42 PM: Message edited by: Cole Angrimson ]
    2000 Grand Prix GTP- Bronzemist Metallic: K&N Fenderwell Intake,3.4\" Thrasher Pulley, v1.0 DHP PCM, 3\" Mandrel Bent DP,Ubend Delete,Dynomax SuperTurbos, 180* Thermostat.<br />Soon to come: ZZP SSIntercooler or N20 or both:)

  • #2
    ok here's you answer....

    the NiteShades paint will let light shine through VERY easily. I have 8 or 9 coats on my taillights, and the light comes through no problem. you'd have to put on like 25+ coats before they'd start getting hard to see.
    \'98 Camaro - SOLD<br />Best E/T: 15.489 @ 86.48 MPH<br />60\': 2.131<br /><a href=\"http://members.cardomain.com/skorpion317\" target=\"_blank\">members.cardomain.com/skorpion317 </a><br />1998 Saturn SL2<br />Official <a href=\"http://www.njdisturbance.com\" target=\"_blank\">NJ Disturbance</a> bracket racer

    Comment


    • #3
      yeah, i put like 10 coats on my old tailights and they were fine
      97 polo metallic green v6<br /><a href=\"http://www.cardomain.com/id/tdaddyz\" target=\"_blank\">My Car</a>

      Comment


      • #4
        yeah i put about three coeats. i kinda wanna go a lil darker so i would say 5-7. also if u do it and it gets to dark, use laquer thinner and a rag, it will wipe right off. i had to do that the first time
        *1997 Camaro v6 3.8*<br />President of NorCal Sinister Six

        Comment


        • #5
          Thanks alot guys. Is there any other stuff i should do to get them to be shiney? But other then that thanks.
          2000 Grand Prix GTP- Bronzemist Metallic: K&N Fenderwell Intake,3.4\" Thrasher Pulley, v1.0 DHP PCM, 3\" Mandrel Bent DP,Ubend Delete,Dynomax SuperTurbos, 180* Thermostat.<br />Soon to come: ZZP SSIntercooler or N20 or both:)

          Comment


          • #6
            the brand that makes night shades also sells clear coat [img]smile.gif[/img] just take your time. i hurried through doing my third brake light and side markers and didnt do too good. looks nice though until you get real close
            2000 3.8 A4 Pewter Camaro

            Comment

            Latest Topics

            Collapse

            • Andy H
              Transmission removal help!!
              by Andy H
              Hey everyone! I've been trying to remove my transmission for two days now! I need to replace the clutch. Only thing I've got left holding the transmission...
              3 weeks ago
            • 2.8 Bird
              Abs inop
              by 2.8 Bird
              Hello, so I changed the front bearings on the bird and the ABS inoperative light came on. I made a mistake of not removing negative battery cable. Now...
              3 weeks ago
            • fishin
              Intermittent Headlight Function 97 Firebird
              by fishin
              I usually have to double, triple my headlight switch for them to come up on my 97 Firebird. I cleaned all connections. Could it be the headlight switch...
              3 weeks ago

            FORUM SPONSORS

            Collapse
            Working...
            X