Working on custom gauge pod for console - FirebirdV6.com/CamaroV6.com Message Board

Announcement

Collapse
No announcement yet.

Working on custom gauge pod for console

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

  • Working on custom gauge pod for console

    Heres the test version I have made out of plexi. Note its VERY rough and I made it in about 20 minutes. It will be a lot better when I get to making a REAL one with lots of detail and thought put in to it. Do you guys think it has any potential?

    Let me get your feedback. Give me ideas. Im going to work on it more tomorrow, I have to work tonight.



    Mustangs.. Come to the darkside...<br /><br />The dark side is the path to the shadow of greed. =D

  • #2
    i think you have the right idea, gauge is kinda tilted though ;)
    2000 3.8 A4 Pewter Camaro

    Comment


    • #3
      pfft [img]tongue.gif[/img] get all technical on me whydontcha! Yeah, I know it is. My next one I need to lower the hole for the gauge -- I ran in t oa problem where the console has the ridges to hold in cassette tapes.. Those kind of rub against some of the connectors on the back of the gauges so I need to move it down in my next one to adjust for that. Is why my first one has the gauge tilted a little bit ;)
      Mustangs.. Come to the darkside...<br /><br />The dark side is the path to the shadow of greed. =D

      Comment


      • #4
        cool
        <a href=\"http://www.geocities.com/hemigtx001\" target=\"_blank\">http://www.geocities.com/hemigtx001</a> <br /> <a href=\"http://www.geocities.com/hemigtx001/Firebird_Index.html\" target=\"_blank\">http://www.geocities.com/hemigtx001/Firebird_Index.html</a> <br />1993 3.4L firebird<br />mods-flowmaster 80 series, removed cat. K&N FIPK. custom ram air ducts to filter.<br />Completed Engine Swap.

        Comment

        Latest Topics

        Collapse

        • Andy H
          Transmission removal help!!
          by Andy H
          Hey everyone! I've been trying to remove my transmission for two days now! I need to replace the clutch. Only thing I've got left holding the transmission...
          2 weeks ago
        • 2.8 Bird
          Abs inop
          by 2.8 Bird
          Hello, so I changed the front bearings on the bird and the ABS inoperative light came on. I made a mistake of not removing negative battery cable. Now...
          2 weeks ago
        • fishin
          Intermittent Headlight Function 97 Firebird
          by fishin
          I usually have to double, triple my headlight switch for them to come up on my 97 Firebird. I cleaned all connections. Could it be the headlight switch...
          3 weeks ago

        FORUM SPONSORS

        Collapse
        Working...
        X