Brake Calipers - FirebirdV6.com/CamaroV6.com Message Board

Announcement

Collapse
No announcement yet.

Brake Calipers

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

  • Brake Calipers

    I was thinking about painting my brake calipers but I wanted to know how hard it is. What are all the steps of doing this? I also wanted to put those Camaro letters on there. Does anyone know where I could pick some of those up?



    This is how Im going to do it. In black with silver letters.. Any help?

    -Derek
    Derek <br /><a href=\"http://www.cardomain.com/id/dmiller_2005\" target=\"_blank\">2002 Metallic Silver Camaro</a><br />35th Anniversary

  • #2
    First you have to sand them down really well. i have a sandblaster i used on the drums, and i just sanded down the calipers really well. I got some high temp paint. the paint i got was actually bar-b-q pit paint. It was about 1000 degree paint. i applied about 4 coats of that. Then i got some clear coat engine 800 degree paint. I put 2 coats of that over the black.





    ^^^pictures arent the best....^^^

    I didnt get any decals, but i was sort of thinking about it. I did a search on where to find some... heres what i found.

    <blockquote>quote:</font><hr>Originally posted by 97camRS:
    anyone wanting the Camaro or Trans Am caliper decals email LS1VetteCYa@aol.com only $20 and he's very cool, and will help you out with suggestions and answer any questions you have! Just tell him that Jerald sent you!!!


    I'm fixen to order these calipers, What did everyone do to their calipers, paint them and clear coat?
    <hr></blockquote>

    -or-

    http://www.afterthoughtsauto.com/brakcaldec.html

    [ March 28, 2003: Message edited by: Loochy88 ]</p>

    96 V6 A4 Camaro and 99 Z28 A4 Camaro
    Visit My F-Body Page

    Comment


    • #3


      These are my rims. Do you all think that the black Calipers with the Silver letters would look good? Would you be able to read CAMARO or would it be cut off by a spoke? Anyone know?
      Derek <br /><a href=\"http://www.cardomain.com/id/dmiller_2005\" target=\"_blank\">2002 Metallic Silver Camaro</a><br />35th Anniversary

      Comment


      • #4
        <blockquote>quote:</font><hr>Originally posted by dmiller_2005:


        These are my rims. Do you all think that the black Calipers with the Silver letters would look good? Would you be able to read CAMARO or would it be cut off by a spoke? Anyone know?
        <hr></blockquote>

        i think black with the silver decals would look great. Make sure to use lots of clear.

        96 V6 A4 Camaro and 99 Z28 A4 Camaro
        Visit My F-Body Page

        Comment


        • #5
          I used a wire brush and cleaned them off really good and then wiped the off with a towel. I painted mine black and I got the silver letters on mine. Turned out better than I thought it would. Good luck.
          1999 Silverado- Bagged, colormatched and rollin on stock chrome 16\'s<br />Make love not war, hell do both, get married

          Comment

          Latest Topics

          Collapse

          • Andy H
            Transmission removal help!!
            by Andy H
            Hey everyone! I've been trying to remove my transmission for two days now! I need to replace the clutch. Only thing I've got left holding the transmission...
            2 weeks ago
          • 2.8 Bird
            Abs inop
            by 2.8 Bird
            Hello, so I changed the front bearings on the bird and the ABS inoperative light came on. I made a mistake of not removing negative battery cable. Now...
            2 weeks ago
          • fishin
            Intermittent Headlight Function 97 Firebird
            by fishin
            I usually have to double, triple my headlight switch for them to come up on my 97 Firebird. I cleaned all connections. Could it be the headlight switch...
            3 weeks ago

          FORUM SPONSORS

          Collapse
          Working...
          X