Announcement
Collapse
No announcement yet.
New and Improved
Collapse
X
-
Off the chain, what did all that run you man? Damn I wish I had T's, my car would be just about complete. Oh, if you put everything in your "the work" link, lo siento. I can't open it from work for some reason, it says it's a "hacking" link so it's filtered. Sweet! [img]graemlins/thumbsup.gif[/img]
"Write that down"
-Van Wilder-235/4517 Chrome Mondera Solaris<br />-Hornet remote start-keyless entry<br />-Pioneer 8400/CD/MP3<br />-2 Audiobahn 10\'s in custom box<br />-Flowmaster exhaust-SLP CAI-*180<br /><br />Never underestimate the predictability of stupidity....Tony from \"Snatch\"
Comment
-
nice job [img]graemlins/thumbsup.gif[/img] [img]graemlins/thumbsup.gif[/img]02 camaro \"silver bullet\" slp CAI, flowmaster american thunder catback, custom 35 anniversary brake light, custom bowtie side markers, custom painted bowtie tailight covers,12 disc cd changer, 18\" replica z06 wheels..
Comment
-
ebay was good to me...
T-TOP KIT $142.50
RIGHT SEAL $31.00
LEFT SEAL $9.99
then i had to buy the bondo, metal saw blades, cut-off wheels, sandpaper, body match paint, and some black gasket sealant. that was an extra $30 or so in supplies.
i would highly recommend having a grinder and an air cutter. it took me about 16-18 hours.
i did not buy the extra weatherstipping piece. so far, i haven't found a need for it. i have an insignificant amount of wind noise increase so i don't see why i need that piece. i cut my t-top liner to fit for now, but i'm going to order another one for a cleaner and tighter fit.
at first, it leaked like a waterfall, but i used the gasket sealant under the weatherstripping, similar to what GM did, and i have absolutely no leaks.
i printed off a few pictures from a few sites for a guide. once you get everything off you can pretty much see what needs to be done. i do have about 10 new cuts on my arms from the metal. the hardest part was cleaning all the aftermath s**t out of my car. that was the filthiest it's ever been.
the t-top kit and weatherstipping i have all came from a '99 camaro. do some serious searching on ebay. all together i spent less than $250 on the entire project.
Comment
-
looks good<b>Black 1996 Firebird</b><br /><b>Newest Edition: Harlan Window Switch</b><br />Nitrous Express Kit,ASCD big block hood, SLP Loudmouth, CATCO hi-flow cat, CAI, -Maf, LSD, Flameball Shifter<br /><b>Best N/A 1/4 in</b> 15.216 @ 89.82 <b>Best N2O 1/4 in</b> 14.352 @ 97.46 <--w/clutch slippage<br /><a href=\"http://www.geocities.com/motorhead69/\" target=\"_blank\">My homepage</a><br /><b>AIM:</b>MotorHead75068 <b>YIM:</b>MotorHead69
Comment
-
<blockquote>quote:</font><hr>Originally posted by Domestic Violence:
ebay was good to me...
T-TOP KIT $142.50
RIGHT SEAL $31.00
LEFT SEAL $9.99
then i had to buy the bondo, metal saw blades, cut-off wheels, sandpaper, body match paint, and some black gasket sealant. that was an extra $30 or so in supplies.
i would highly recommend having a grinder and an air cutter. it took me about 16-18 hours.
i did not buy the extra weatherstipping piece. so far, i haven't found a need for it. i have an insignificant amount of wind noise increase so i don't see why i need that piece. i cut my t-top liner to fit for now, but i'm going to order another one for a cleaner and tighter fit.
at first, it leaked like a waterfall, but i used the gasket sealant under the weatherstripping, similar to what GM did, and i have absolutely no leaks.
i printed off a few pictures from a few sites for a guide. once you get everything off you can pretty much see what needs to be done. i do have about 10 new cuts on my arms from the metal. the hardest part was cleaning all the aftermath s**t out of my car. that was the filthiest it's ever been.
the t-top kit and weatherstipping i have all came from a '99 camaro. do some serious searching on ebay. all together i spent less than $250 on the entire project.<hr></blockquote>
killer f****** deal!!!1999 C5<br />2000 Ford Lightning<br /><i>Don\'t hate me because I\'m awesome</i>
Comment
-
More power to ya! Looks like you did a great job on it!! Many congrats to ya for an excellent job! [img]graemlins/thumbsup.gif[/img] [img]graemlins/thumbsup.gif[/img] :cool:2000 Pewter Metallic Formula M6 <br /><br /><a href=\"http://flaminbird.smugmug.com\" target=\"_blank\">My 2000 Formula</a>
Comment
Comment