Tweet
i got some 9006 xenon bulbs for my camaro lowbeams to do the headlight conversion thing and i got them all sealed up and everything and hooked them up, and about 15 seconds after i turned them on the drivers side bulb went out. so i wiggled the wires a little and stuff and it came back on twice but just for a few seconds. so then i switched the headlights and the same one wouldnt turn on. then i took it out and it looked fine, the wires inside were still connected and everything. is the bulb about ready to go out or what is wrong? oh by the way i didnt touch the bulbs at all with my hands and cleaned them with the supplied alcohol swabs before i put them in.
-
<a href=\"http://www.cardomain.com/memberpage/483076\" target=\"_blank\">http://www.cardomain.com/memberpage/483076</a> <br />TSP rumbler, straight pipe, corvette servo. <br />Soon - 3.42+lsd,headers, cai, -
When you say you switched the headlights, do you mean that you just stuck the same bulb in the other side?
If thats the case, sounds like you got some crap bulbs..1999 C5<br />2000 Ford Lightning<br /><i>Don\'t hate me because I\'m awesome</i>
-
Hey everyone! I've been trying to remove my transmission for two days now! I need to replace the clutch. Only thing I've got left holding the transmission...2 weeks ago -
Hello, so I changed the front bearings on the bird and the ABS inoperative light came on. I made a mistake of not removing negative battery cable. Now...3 weeks ago -
I usually have to double, triple my headlight switch for them to come up on my 97 Firebird. I cleaned all connections. Could it be the headlight switch...3 weeks ago
Comment