Tweet
how do i install them? any instructions?
-
-
probably get more responses in the Appearance section.2000 GTP<br />Thrasher CAI, 3.4\" pulley, DHP PCM<br />Member RedLineVSix<br />Best ET-14.02<br />Best Trap-97.15 -
<blockquote>quote:</font><hr>Originally posted by John D.:
probably get more responses in the Appearance section.<hr></blockquote>
go south, yong post!2011 Camaro LS 6M, in black.Comment
-
I installed the reverse indiglo's recently. Install is basically self explanitory. Take apart your dash until you can take the gauge cluster out and put the gauge overlays on leaving the needles intact and slip the overlays over each of the needles. Put everything back together. As for the power supply on mine, i hooked it up to the switch you turn your lights on with. I hooked the red wire to the yellow wire and the black to black. This way your gauges only come on when you turn your lights on. EnjoyComment
-
Hey everyone! I've been trying to remove my transmission for two days now! I need to replace the clutch. Only thing I've got left holding the transmission...3 weeks ago -
Hello, so I changed the front bearings on the bird and the ABS inoperative light came on. I made a mistake of not removing negative battery cable. Now...3 weeks ago -
I usually have to double, triple my headlight switch for them to come up on my 97 Firebird. I cleaned all connections. Could it be the headlight switch...3 weeks ago
Comment