painting rims - FirebirdV6.com/CamaroV6.com Message Board

Announcement

Collapse
No announcement yet.

painting rims

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

  • painting rims

    Has anyone painted their rims, and if so do you have any pics and what type of paint you used? thanks
    \'98 3.8L m5<br /><br />whisper lid<br />SLP CAI <br />lsd <br />3.73 gears <br />Flowmaster American Thunder catback exhaust

  • #2
    Originally posted by stealth1281:
    Has anyone painted their rims, and if so do you have any pics and what type of paint you used? thanks
    My next two days I have off from work will be this Fri & Sat, and I'll be painting my salad shooters. I'm sanding them down, spraying about 2 or three coats of primer, and then spraying about 3-5 light coats of gunmetal paint. After all is done, I'm re-polishing the outer lip and clearcoating. I'll take pics along the process and post them when all is finished.
    sigpic

    Comment


    • #3
      yeah i painted my rims and 2 other of my friends painted theirs too heres some pic's.
      and here is my car with painted rims.
      96 camaro 3800 series II, A4<br />BONE STOCK NOT FOR LONG

      Comment


      • #4
        I was thinking about painting my salad shooters as well. What grit sand paper should I use or does it not matter?
        \'99 SSM Camaro V6 M5<br />(mod list on cardomain site; too long to list here)<br /> <a href=\"http://www.cardomain.com/id/v6cam99\" target=\"_blank\">http://www.cardomain.com/id/v6cam99</a>

        Comment


        • #5
          a qwiky rattle can on my old salad shooters
          http://memimage.cardomain.net/member...1_107_full.jpg

          [ April 12, 2005, 12:55 PM: Message edited by: wolf ]
          Wolf<br /><a href=\"http://www.cardomain.com/memberpage/249111/7\" target=\"_blank\">95 black t-top camaro</a>,3.4 5 speed,ud pullies,plugs/wires,de-shaft tb & gutted airbox, homemaid short throw shifter

          Comment


          • #6
            Originally posted by 99v6cam:
            I was thinking about painting my salad shooters as well. What grit sand paper should I use or does it not matter?
            I'd probably use ~400 to start with, then work your way to 800-1000 to make sure it's smooth, sand with the fine grit between primer and paint layers as well and it should turn out really smooth. I havn't done it yet but I plan on doing it to my auto-x wheels soon.
            <a href=\"http://www.cardomain.com/id/briansr\" target=\"_blank\">97 White Pontiac Firebird 3.8 A4</a><br />Mods- 2.75\" exhaust, Dynomax muffler, magnaflow cat, SLP CAI, Hypertech 160* thermo, Fan switch<br />Suspension-Kumho Ecsta 712\'s, 32mm/19mm sway bars<br /><br />Our Lady of Blessed Acceleration, don\'t fail us now. <br />-Elwood Blues

            Comment


            • #7
              Black96V6... what color paint did you use? It looks good. I wanna either paint my rims black or polish them... I have the stock 5 spokes... can't decide but your car looks hot.
              \'97 Camaro 3.8L

              Comment


              • #8
                i used 140-150 grit, it work just fine. my color is smoke gray. i'll take some more pic's but closer sou guys can see better.
                96 camaro 3800 series II, A4<br />BONE STOCK NOT FOR LONG

                Comment


                • #9
                  hockeyman, definately keep me posted as to the pictures of your progress. thanks

                  black96V6, excellent job on the wheels you painted. do you think there will be much chipping of the paint? Also, what type/brand of paint did you use?
                  \'98 3.8L m5<br /><br />whisper lid<br />SLP CAI <br />lsd <br />3.73 gears <br />Flowmaster American Thunder catback exhaust

                  Comment


                  • #10
                    I painted mine.... http://img.photobucket.com/albums/v6...995/black6.gif

                    Comment


                    • #11
                      Originally posted by hockeyman:
                      </font><blockquote>quote:</font><hr />Originally posted by stealth1281:
                      Has anyone painted their rims, and if so do you have any pics and what type of paint you used? thanks
                      My next two days I have off from work will be this Fri & Sat, and I'll be painting my salad shooters. I'm sanding them down, spraying about 2 or three coats of primer, and then spraying about 3-5 light coats of gunmetal paint. After all is done, I'm re-polishing the outer lip and clearcoating. I'll take pics along the process and post them when all is finished. </font>[/QUOTE]Did you make any progress on your wheels? I plan on starting mine tomorrow.
                      \'98 3.8L m5<br /><br />whisper lid<br />SLP CAI <br />lsd <br />3.73 gears <br />Flowmaster American Thunder catback exhaust

                      Comment


                      • #12
                        Not yet. Going to start sanding them in about 1 hour. BigTime hangover yesturday & today! Twas a good friday night...a little too good! [img]graemlins/barf.gif[/img]

                        I'm never drinking again! :rolleyes:
                        sigpic

                        Comment


                        • #13
                          well, i just finished painting 2 of the wheels, and they turned out great....hopefully the other 2 will be also
                          \'98 3.8L m5<br /><br />whisper lid<br />SLP CAI <br />lsd <br />3.73 gears <br />Flowmaster American Thunder catback exhaust

                          Comment

                          Latest Topics

                          Collapse

                          • Andy H
                            Transmission removal help!!
                            by Andy H
                            Hey everyone! I've been trying to remove my transmission for two days now! I need to replace the clutch. Only thing I've got left holding the transmission...
                            2 weeks ago
                          • 2.8 Bird
                            Abs inop
                            by 2.8 Bird
                            Hello, so I changed the front bearings on the bird and the ABS inoperative light came on. I made a mistake of not removing negative battery cable. Now...
                            2 weeks ago
                          • fishin
                            Intermittent Headlight Function 97 Firebird
                            by fishin
                            I usually have to double, triple my headlight switch for them to come up on my 97 Firebird. I cleaned all connections. Could it be the headlight switch...
                            3 weeks ago

                          FORUM SPONSORS

                          Collapse
                          Working...
                          X