I'm wondering if anyone has experimented with 2 different wheel sizes..for example 17's or 18's in the front and 19's in the rear. Does it look decent or not... I know the Vette has them, but I don't think they are that noticeable. Give some opinions on this. Thanks!
Announcement
Collapse
No announcement yet.
Anyone have 2 different size wheels for front and rear?
Collapse
X
-
I have vette wheels on my car, 17s up front and 18s out back. I dont seem to have any problems with them. You can also keep the actual tires close in overall diameter by making the tire height less (lower profile) for the 18. I havent run into any problems with mine though.AIM: Alientr8tr<br /><a href=\"http://www.cardomain.com/memberpage/583450\" target=\"_blank\">1998 Camaro 3.8L</a><br />Flowmaster 80-series, !FRA, Eibach Springs, KYB AGX, SLP sway bars, 3.42/LSD, Wings West kit, Z06 Motorsports, Silverstone Metallic paint<br /><a href=\"http://www.shift5.com/\" target=\"_blank\">Shift 5</a> - My Band
Comment
-
http://bellkevin.home.comcast.net/porsche.jpg
You tell me [img]smile.gif[/img]
When I get my suspension work done it will have a nice rake to it with the front lower than the front for weight transfering [img]smile.gif[/img]Mustangs.. Come to the darkside...<br /><br />The dark side is the path to the shadow of greed. =D
Comment
-
On the Pontiacs the rear fenders are flared quite a bit more than the fronts. Staggered sizes (at least width/offset) are a must if you want the outside of the wheel to fit flush front and back.
I wouldn't go more than 1" difference in diameter from front to rear, that would probably look bad.
1994 Firebird 3.4<br />15.65 @ 86.8<br /><a href=\"http://www.funkz.net/firebird.htm\" target=\"_blank\">funkz.net/firebird</a><br /><a href=\"http://mywebpages.comcast.net/funkz/timeslips.htm\" target=\"_blank\">Timeslips</a>
Comment
Comment