Glow gauge Help!!!please!!1

[GreenDragon]

Iam going to put it in tomorow,So do I have to remove the stock black gauage or can I over lap it?

[ October 26, 2005, 04:56 PM: Message edited by: GreenDragon ]

[GreenDragon]

anybody? this is probably under the wrong section,is you want mods you can bounce this over to electronics

[ October 26, 2005, 05:49 PM: Message edited by: GreenDragon ]

[Heartbeat_of_94]

if i am wrong someone please correct me on this...i am assuming it is an overlay so, if it is, all you do is take the dash apart, set it up on top of the stock black gauge, and then hook it up. mine is an overlay and didn't take me too long. the hard part is trying not to mess up the needles but other than that, shouldn't be too hard.

[GreenDragon]

thanks heartbeat!Mine is a overlay.So I can slip it over the needles then(the speedo and the tach can come off since they rest on pins.And then preceed to hook it up to the head light control right?

[Heartbeat_of_94]

yeah...make sure you take a close up pic of your needles or something so you know where they are when you start to install the overlay. then just hook up the wires